Just taking some babysteps here, so please excuse me if I'm in the wrong place.
I'm just starting and haven't done any serious work yet, I'm reading and learning as I go.

I want to edit my car lightly within the stock SOI and Duration limits, because I'm not going to extrapolate something as "dangerous" as SOI en EOI without any experience or knowhow.

The current IQ limit is at 55 mg/stroke and the SOI and Duration both alow up to 70, so I'm just changing the limiters and other maps to meet the maximum of 70 mg/stroke.


Some background:
Alfa Romeo 156 1.9 JTD 8v 85kw / 115hp, 10/2002 euro 3 @ 334.000 km (has to last till at least 600.000)
hw/sw: 740-242
- EGR disabled by switchbit and hardware removed, map not changed due to reading something about possible MAF references.
- Original airfilter + housing, modified inlet (straight and butterfly valve removed)
- Installed WMI 50/50 bio-ethanol / water injecting with 80cc nozzle @ apprx. 1.3 bar boost.
- Fully open exhaust, catalysts removed.

All standard maintenance is done, also: new high pressure pump, injectors, SMF and stage 1 clutch.


Included in the RAR file / attachment:
- Ori file
- Mod file
- My Map Pack (hopefully correct axes!)

Changed:
- SVPRL (found 8 but am not sure about 798A6)
- Torque limit map (72E66)
- Boost map (77CF4)
- Boost limit map (77F24)
- Driver wish 1 en 2 (78332 and 794E2)
- Rail pressure map (for 70mg/stroke, 7A5AA)

Quick question.
Maps 79154 79194 and 791d4 are torque limiters (1st, 2nd gear and drive away, 15x1)
All value's are on 100.

Is this Nm or do I need a factor or offset?
The "Defect" map is different and limits to:

1000-4300 rpm
23,8 25,0 26,0 27,0 28,0 27,0 20,0 0,0 0,0 0,0 0,0 0,0

I want to limit 1st gear and drive away to feel the effect and lower the load.
Also, are these all limiting maps?

volgens mij zijn er niet veel alfa tuners hier

sandor1987 wrote:volgens mij zijn er niet veel alfa tuners hier

vermoedelijk omdat de 156 oud is

Certainly because car is quite old