msa 12 old school help

Posts related to specific vehicles, or any other general tuning info.

Return to General tuning

msa 12 old school help

Postby the1212 » Tue Oct 30, 2018 10:52 pm

hey guys im kinda newbie in this Ecus ive searched a lot for factors adresses etc
i have one project already done with all the map adresses etc

and then my surprise the adresses dont match with the same ECU and now im F***d cz i dont get this at all, as i said im pretty noob
i used to "train" in more recent ecus like edc15 and with this one (msa12) im stuck all the way
all the maps i open doesnt seem to nothing maybe im doing something very wrong or just a bad reading from my minipro
or even my noob skills are pretty useless
im reading doesnt matter if its on 8bits or 16bits decimal view and i cant figure it out
dont seems like anything that i was used to "see in edc15"

696 low ? 697 high?

it is possible that is already remaped and i just dont get it by 2d or the text
the only map detected by winols is for turbo (likely n75) but even this one has values that doesnt fit in anything :(

cant find :
driver wish
torque map
and also the smoke map
the turbo etc im on it (not sure though)

If you wanna help me pls feel free and i will apreciate the help
the files are in the atachment!
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

the1212
New user
 
Posts: 9
Joined: Wed Oct 10, 2018 3:00 pm
Location: Portugal

Re: msa 12 old school help

Postby the1212 » Wed Oct 31, 2018 10:15 pm

any1?

the1212
New user
 
Posts: 9
Joined: Wed Oct 10, 2018 3:00 pm
Location: Portugal

Re: msa 12 old school help

Postby tirex5 » Thu Nov 01, 2018 2:19 am

Try edit in winols 696 first end use 8bit structure and second 697 with 8bit. I do something for you but Im not sure it is good. :crazy:
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

tirex5
New user
 
Posts: 4
Joined: Tue Jun 27, 2017 9:49 am
Location: poland

Re: msa 12 old school help

Postby the1212 » Thu Nov 01, 2018 6:42 pm

what more maps should exist on 696.bin?
i found:
drivers wish
http://prntscr.com/ld744l

inverse drivers wish
http://prntscr.com/ld74bl

smoke limiter
http://prntscr.com/ld74kq

pump voltage(not sure if its the right factor for mv)
http://prntscr.com/ld75fp

and... not sure if this is the torque limiter
http://prntscr.com/ld75ok

thanks tirex for the help

i used this forum and this factors
rpm - signature 20, factor 21
IQ - signature 3B?, factor 0,2
Pedal Position % - factor 0,392157
Pump Voltage mV - factor 16,06 (not sure)
Air Mass(MAF) - signature 46, factor 3,333200
Temperature °C - signature 5, factor -0,750000 offset 150

the other as 6 signature dont know what it is

dunno how many maps more missing dont recognize any of the rest

heres the OLS with factors aplied on all already named too
WinOLS 686 .rar
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

the1212
New user
 
Posts: 9
Joined: Wed Oct 10, 2018 3:00 pm
Location: Portugal

Re: msa 12 old school help

Postby the1212 » Fri Nov 02, 2018 11:11 am

Does the gt1549 handles afr 17.1? 850mass air flow to 48-49mg of fuel
I will change later to msa15 from afn with gt1749va
When i bought the car i was pretty sure that was already tuned but im seeing 34 as maximum value for torque so im guessing its not tuned at all
Not sure if it handles the 48/850 on the smoke map without much smoke

the1212
New user
 
Posts: 9
Joined: Wed Oct 10, 2018 3:00 pm
Location: Portugal


Return to General tuning

Who is online

Users browsing this forum: No registered users and 0 guests