Mpps error writing EDC15

Post your topic here if there is no suitable forum...

Mpps error writing EDC15

Postby Oxidius » Mon Feb 10, 2014 1:32 am

Hello, I am trying to write modified file (*.mod) to my ecu using mpps cable and sw but after I begin writing I always gets an error message "conditions not correct" and it doesn't write. Ecu id works fine and reading works fine too so where is the problem?

Thanks

Oxidius
New user
 
Posts: 9
Joined: Tue Feb 04, 2014 10:10 am
Location: Czech Republic

Re: Mpps error writing EDC15

Postby alex_sk » Mon Feb 10, 2014 11:06 am

Battery voltage?

alex_sk
Gold
 
Posts: 152
Joined: Wed Dec 05, 2012 3:06 pm
Location: Belarus

Re: Mpps error writing EDC15

Postby Oxidius » Mon Feb 10, 2014 2:51 pm

About 12,2V. Need more?

Oxidius
New user
 
Posts: 9
Joined: Tue Feb 04, 2014 10:10 am
Location: Czech Republic

Re: Mpps error writing EDC15

Postby Oxidius » Mon Feb 10, 2014 7:45 pm

It's OK now, I tried to charge it with car battery charger and than flash :)

Oxidius
New user
 
Posts: 9
Joined: Tue Feb 04, 2014 10:10 am
Location: Czech Republic

Re: Mpps error writing EDC15

Postby gedvix » Sat Sep 06, 2014 5:03 pm

exact same problem :|

gedvix
New user
 
Posts: 3
Joined: Sat Sep 06, 2014 4:59 pm
Location: belarus

Re: Mpps error writing EDC15

Postby manfred » Sat Sep 06, 2014 11:47 pm

take out the fuse from dash and Radio

test and give feedback

manfred
Silver
 
Posts: 81
Joined: Sun Nov 18, 2012 4:45 pm
Location: Austria

Re: Mpps error writing EDC15

Postby ramos0815 » Mon Sep 15, 2014 4:30 pm

Original radio? If not try it with the original....i had the same problem ....

ramos0815
New user
 
Posts: 23
Joined: Tue Aug 12, 2014 7:01 pm
Location: Germany

Re: Mpps error writing EDC15

Postby DejanD » Sat Nov 15, 2014 11:23 pm

hi

try connect ecu on bench
ECU
2,37pin +12V
4,5pin massa
16pin k line

OBD
4.5 massa
16 12v
7 k-line

DejanD
New user
 
Posts: 11
Joined: Tue Oct 22, 2013 12:10 am
Location: Zagreb

Re: Mpps error writing EDC15

Postby cct » Fri Feb 06, 2015 12:42 pm

You also can have some CHKSUM error, or your drivers for MPPS cable aren`t ok. You can also try to do the writting like DejanD described, but if this won`t go then you will have to desolder the chip and write the new sw on the chip programmer like for instance Batronix or some other Universal programmer for 29fxxx chips.

cct
Silver
 
Posts: 65
Joined: Mon Apr 29, 2013 12:22 pm
Location: Slovenia

Re: Mpps error writing EDC15

Postby casabbian » Sun Jan 13, 2019 7:14 pm

So have anyone solved the problem? I have same thing writing error with mpps.

casabbian
New user
 
Posts: 9
Joined: Tue Nov 27, 2012 10:02 pm
Location: earth

Next

Return to Other

Who is online

Users browsing this forum: No registered users and 0 guests