Looking for PD130 210hp/420nm Tuning file.

by **urbandenim** » Thu Mar 05, 2015 1:14 am

Here is my current tuning file that I have made myself, it runs perfectly on the car but I feel something has been missed.

My goal is to get to 210bhp/420nm.

My car is PD130 + BV43(PD170) turbo + FMIC + EGR Delete + S2000 Air Filter + VAC Simplification + Backbox Delete.

I think its pretty much there, but something feels like its not quite right, It currently doesn't smoke either. I'd like a bit of smoke if possible, but not too much.

My car 210 aim.zip

by **parik** » Thu Mar 05, 2015 11:15 am

Have you biger injectors? without there is not posible required power!

by **TiagoC** » Thu Mar 05, 2015 11:35 am

parik wrote:Have you biger injectors? without there is not posible required power!

?????????

by **adriancl** » Thu Mar 05, 2015 11:41 am

parik wrote:Have you biger injectors? without there is not posible required power!

Can get 190HP and 450Nm with PD 130 injectors, without problems.

by **urbandenim** » Thu Mar 05, 2015 12:09 pm

adriancl wrote:
parik wrote:Have you biger injectors? without there is not posible required power!

Can get 190HP and 450Nm with PD 130 injectors, without problems.

parik wrote:Have you biger injectors? without there is not posible required power!

You two need to get off this website. Standard PD130 injectors are good for 210hp! Do some research before lying on the internet.

by **urbandenim** » Thu Mar 05, 2015 1:59 pm

Seriously? 5 downloads and nothing? Just a lot of file stealers on this forum then?

by **parik** » Thu Mar 05, 2015 2:28 pm

important is making doi extrapolation for 80mg and add more degrees (4-5) for soi

by **urbandenim** » Thu Mar 05, 2015 3:02 pm

parik wrote:important is making doi extrapolation for 80mg and add more degrees (4-5) for soi

If you look at the file, you will see i've already done this. This isn't the "rate my tune" section. Its the request section.
I am requesting someone to look at my file, and modify it accordingly. Not offer help and advice.

Thanks

by **parik** » Thu Mar 05, 2015 5:22 pm

but you have this modification only in one map, if you want help send me PM.

by **urbandenim** » Thu Mar 05, 2015 5:44 pm

parik wrote:but you have this modification only in one map, if you want help send me PM.

Again, you are confused. This is not the HELP section.
This is the tuning file request section, I upload my file, someone tunes it and sends it back.

You also said that I can't get 210/420 on standard injectors, when there's cars all over europe running the same setup as me and getting 210/420. So your help isn't even going to help me much when you say it can't be done in the first place, when in fact it definitely can.

I need someone who knows how to get the results from the setup I have. Not someone who's going to say "change this, change that"

Thanks