immo off siemens sirius 32

by **dadal** » Tue Jan 06, 2015 7:08 pm

Hi to all,
I have problem with immobilizer of clio2, red LED continue blinking.

Car : Renault clio 2 1.2 8V petrol-benz. with airco year 2000
ecu : siemens sirius S110030104 E renaultnumber:7700110471-7700115207
UCH : BMT N4

I tried to desoldering eprom flash 29f200bb ,eprom and somes pcb pads are broken ( i had no galletto2 at that time)

I want to buy another ECU with the same number and to find the original file of old ECU, writing with galletto

I've found a cheap ECU wit same siemensnummer S110030104, but renaultnummers are different ! is that a problem ???
have anyone original file for my old ECU ?

I've read on the forums that siemens 32 has two different versions,with CAN and without CAN... without CAN need no emilator for immo off. it is plug & play
how can I see this ecu with or without CAN is ? what is the difference ?

thanks for interest,,,

by **bogdanwmw** » Tue Jan 06, 2015 11:14 pm

I save you. Post your dump 29f200..

by **dadal** » Wed Jan 07, 2015 12:08 am

bogdanwmw wrote:I save you. Post your dump 29f200..

it would be very nice, but I can not read 29f200 because old ECU is broken, and Some pins of 29f00 are also broken.

i think I need a new ecu, have you got a immo off dump ? or original dump ?
Car : Renault clio 2 1.2 8V petrol-benz. with airco year 2000
ecu : siemens sirius S110030104 E renaultnumber:7700110471-7700115207

which program is the best for originale dump to change in immo off ? whic program do you use.

Thank you for interest,

by **bogdanwmw** » Wed Jan 07, 2015 12:48 am

buy another ecu if you say it's broken. to help them make immo off..

by **dadal** » Fri Jan 09, 2015 1:50 am

update !
I've already bought ECU, I have it within few days,
I need the answer to my first message...
thanks,

by **easydiag** » Thu Jan 15, 2015 12:57 pm

hi,
first you don't need galetto to read this ECU , you need an other flash programmer such superpro , beeprog.....etc.
then read the secand hand ecu we will make immo off for you, or give you immo off ready to start your car.

by **dadal** » Fri Jan 16, 2015 12:00 am

easydiag wrote:hi,
first you don't need galetto to read this ECU , you need an other flash programmer such superpro , beeprog.....etc.
then read the secand hand ecu we will make immo off for you, or give you immo off ready to start your car.

Hi Friend,
I will try to upload the dump here,
Thanks for your response