how safe is galetto 1260?

by **loot34** » Sat Nov 03, 2012 3:26 pm

Hi i have 407 1.6 hdi bosch edc16c34, i have my ori.bin and nofap.bin in winols ok will it write back to car safely 100% or maybe lock ecu? And will my ori.bin write back safely if i have problem? I'm using galetto 2
Thanks for your help

by **mexanico1971** » Mon Nov 05, 2012 5:11 am

no ! there is no problem !
just put a charger wile you read or flash the map !

by **loot34** » Mon Nov 05, 2012 1:03 pm

Thanks I'll definitely put a charger on! I have Peugeot planet and Ford ids so same rules apply.
:thumbup:

by **fcardoso** » Tue Nov 06, 2012 8:03 pm

When Galletto says to turn off your dash, you do nothing, just wait about 15 seconds.

by **ecuedit** » Tue Nov 06, 2012 8:21 pm

...and then press OK :)

by **loot34** » Tue Nov 06, 2012 10:25 pm

thanks thats good advice! just spent all day sorting the file with nofap mod I'll post it and hopefully some1 will be good enough to check it.

by **sjonv** » Fri Nov 09, 2012 12:33 pm

hi,

i have tryed it for some cars with edc16 for vag and peugeot but mostly it didnt worked for me.

Maybe i was doing it wrong.

I think it is better to use mpps.

Galletto can do some cars good, like peugeot siemens boot. This options doenst have the ori tools if magpro or cmd.

Maybe a good tip: if you have flashed the car, put ignition off for at least 3 minutes (for losing injector coding).

Br johnny

by **yan.ko** » Mon Nov 12, 2012 1:31 am

+1 for MPPS

by **ecuedit** » Mon Nov 12, 2012 9:41 am

Mpps is more suitable, I agree. :)

by **loot34** » Mon Nov 12, 2012 9:09 pm

Thanks i used it successfully on edc16c34 all done so nofap seems good would like to do a small remap next but the car is going back to my dad, my van uses the visteon system which is probably a lot harder than Peugeot to remap.