Help with defining maps, unfinished map-pack A4 130PD

Posts related to specific vehicles, or any other general tuning info.

Return to General tuning

Help with defining maps, unfinished map-pack A4 130PD

Postby TripleD » Mon Apr 09, 2018 7:09 pm

Hey guys! Im a beginner, and this is my ori file, could someone PLS HELP and define some maps for me? Like SVRL, EGR switch and etc. I have found most of the maps on the file, SOI, Durations, Driver wish, etc. I will be very thankful! :thumbup: :angel: :angel:
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

TripleD
New user
 
Posts: 7
Joined: Tue Mar 27, 2018 10:54 pm
Location: Bulgaria

Re: Help with defining maps, unfinished map-pack A4 130PD

Postby Manuel Pinto » Mon Apr 09, 2018 7:37 pm

Hi.
Search for VAG EDC SUITE, donwload the software and open your file there.
It will give you all maps you need for remap your car.
I start some time ago and i do it this way. ;)
Next time upload you ori file too

Manuel Pinto
Bronze
 
Posts: 28
Joined: Sat Apr 05, 2014 4:41 pm
Location: Portugal

Re: Help with defining maps, unfinished map-pack A4 130PD

Postby TripleD » Mon Apr 09, 2018 7:50 pm

I have the newest version of EDC Suite 2.0.1.9. I think, but Im learning winOls and thats why Im searching them manually, the uploaded file is the ori file.

TripleD
New user
 
Posts: 7
Joined: Tue Mar 27, 2018 10:54 pm
Location: Bulgaria

Re: Help with defining maps, unfinished map-pack A4 130PD

Postby Manuel Pinto » Mon Apr 09, 2018 11:13 pm

Hi.
Sorry i want to mean WinOls project.

-> 6DA04 -> Smoke Limiter by MAF

I think the axis X is Air Flow from MAF data, because 1051 cant be boost pressure, all values of boost is absolut.
If you do a search for 06000 06000 06000 there is another map like this for Boost Pressure. Check 6e32c.

-> 6C116 -> EGR

Maybe it have switch, but what i have seen around here is fill with the highest value. 850 btw
I did the same at my Golf PD engine too, i block the vacum line and for now its ok, +/-1500km and no fault, no light on dashboard.
I check with VCDS and the expected value is 850 but the solenoid its working normally. Try and see what i mean.

-> 741a2 -> SVRL

I did a search for 5300, for what i read, 5300RPM is the factory max rev the engine can do.
Notice that is the only value its dont seem be in RPM axis. -> 03584 05300 00050
I read we could made popcorn/revlimiter with this map but i did with torque limiter, and its work good.

I hope its help.
Remember im not an expert, lets wait for someone more experience.

Manuel Pinto
Bronze
 
Posts: 28
Joined: Sat Apr 05, 2014 4:41 pm
Location: Portugal


Return to General tuning

Who is online

Users browsing this forum: No registered users and 2 guests