Having issues disabling DPF - Citroen C5 III 2.2HDI

by **edwinPlow** » Fri Jun 12, 2026 4:59 am

Hi, I'm in NZ so don't need a DPF on my car as it's pre 2009. Car is a Citroen C5 III 2008 2.2HDI

I am trying to disable the DPF and FAP fluid using the Galletto 1260 EOBDII cable.

Problem is that when I plug the cable in and try to read the ECU Data with the included software it doesn't complete the operation. I have tried all the different drivers and the only 2 that get to 50% before giving an error are the:

Bosch EDC 16 C3.9 FLASH 29BL802CB
Bosch EDC 16+ C34 FLASH M58BW016xB

Can't attach a picture but the error given is: errore datil -5

Am I missing something or is my car not covered by the software.

In Lexia I can't find an information section that shows the ECU model and version but when I go into BSI it shows EDC16CP39.

Any help to get this working would be great. Thanks.

by **User146** » Fri Jun 12, 2026 5:33 pm

edwinPlow wrote:Hi, I'm in NZ so don't need a DPF on my car as it's pre 2009. Car is a Citroen C5 III 2008 2.2HDI

I am trying to disable the DPF and FAP fluid using the Galletto 1260 EOBDII cable.

Problem is that when I plug the cable in and try to read the ECU Data with the included software it doesn't complete the operation. I have tried all the different drivers and the only 2 that get to 50% before giving an error are the:

Bosch EDC 16 C3.9 FLASH 29BL802CB
Bosch EDC 16+ C34 FLASH M58BW016xB

Can't attach a picture but the error given is: errore datil -5

Am I missing something or is my car not covered by the software.

In Lexia I can't find an information section that shows the ECU model and version but when I go into BSI it shows EDC16CP39.

Any help to get this working would be great. Thanks.

If it’s EDC16CP39 I don’t think that Galletto 1260 can do these. You need at least MPPS or Kess.