Ford Focus 1.8 Tdci 115Hp => 140Hp

Help and tips about your tune, post your work in here.

Return to Rate My Tune

Ford Focus 1.8 Tdci 115Hp => 140Hp

Postby capske » Fri Jul 04, 2014 10:53 am

Can someone please check this tuning?

Car has sometimes black smoke coming out of exhaust when accelerating an going over 3K rpm.

Thanks.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

capske
Silver
 
Posts: 67
Joined: Mon Nov 18, 2013 7:34 pm
Location: belgium

Re: Ford Focus 1.8 Tdci 115Hp => 140Hp

Postby zok » Mon Jul 07, 2014 8:49 am

FRP limiters raised from 1400 to 1450 bar
FRP above 9 mg/str(!!!) and 1250 rpm raised for 50 bar flat
TL totally fu*ked up (look at the screenshot)
DOI raised up to 20% (that is a thing you don't do when making a remap with any of calculations involved)
Torque/torque calibration map messed up for 10-21% above 2500 rpm at 20 mg/str and up (another thing that shouldn't be done - that is the main reason for way too much fuel at high rpm)
wish map - ok, I get it, but was already high enough in original state

Hey, what about boost?
You've got 12x12 N75 maps at 6AA92, 6ABB2, 6B032 and 6B152, 12x12 boost maps at 6ACD2 and 6ADF2, 6B272 and 6B392 (factor 10).
They haven't been even touched.

First, DOI map (60742, 12x12) should be restored to original state.

Then TQ/TQ calibration (66FE0, 12x12) should be restored to original state.

Then all the limiters should be found to inject more fuel so that the ECU would KNOW what it's doing.

If time/knowledge is the problem, try modding TQ/TQ map a bit more wisely (but keep original DOI map!) and take care of turbo boost. These ECUs act a bit funny, sometimes like they ignore turbo boost maps. A lot can be done by editing N75 maps to avoid overboosting.

Warning - these ECUs tend to overboost massively when on increased fuelling, with no DTC or warning present! Take great attention to avoid that! Boost can be safely raised to 2400 mbar.

Ah, and the ECU is by Delphi, not EDC15.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

zok
Diamond
 
Posts: 318
Joined: Sun May 05, 2013 9:29 pm
Location: Slovenia

Re: Ford Focus 1.8 Tdci 115Hp => 140Hp

Postby capske » Mon Jul 07, 2014 3:25 pm

Hi Zok,

Indeed, the ECU is a delphi. I don't know why I wrote that it's an EDC 15, sorry for that.

Ok, so tuning is not good?
Better to put the original file back?

I don't do remapping. This tuning has been baught online.

Good to know, is the last tuning I baught there.

For other people who read this, I'm not going to mention from where I baught this tuning on the site.
If you PM me, I'll be glad to tell you where this has been baught so you don't have the same as me, and buy a crappy tuning.

Grtz & thanks Zok

capske
Silver
 
Posts: 67
Joined: Mon Nov 18, 2013 7:34 pm
Location: belgium

Re: Ford Focus 1.8 Tdci 115Hp => 140Hp

Postby BokiRS » Mon Jul 07, 2014 4:55 pm

Very bad tune.
Many tuners dont know to work on Ford.

User avatar
BokiRS
Tuning Service badge A
 
Posts: 141
Joined: Mon Aug 12, 2013 10:56 am
Location: Belgrade


Return to Rate My Tune

Who is online

Users browsing this forum: No registered users and 0 guests