Hi,

I'm searching for some 406 2.2 HDi relevant EDC15C2 damos or mappack files.
Can damos/mappacks from other cars that also use EDC15C2 be looked at to get layout of maps? :)
.. or does each manufacturer have it own layout/format of how data is laid out in the memory .. :?:

Here is the list of cars that use EDC15C2 (http://www.kwp2000.info/supported_cars):

Fiat
Ulysse 2.0 JTD 16V Bosch EDC15C2
Ulysse 2.2 JTD 16V Bosch EDC15C2

Lancia
Phedra 2.0 JTD Bosch EDC15C2
Phedra 2.2 JTD Bosch EDC15C2

Citroen
Berlingo 2.0 HDI Bosch EDC15C2
C5 2.0 HDI Bosch EDC15C2
C5 2.2 HDI Bosch EDC15C2
C8 2.0 HDI Bosch EDC15C2
Evasion 2.0 HDI Bosch EDC15C2
Jumper 2.0 HDI Bosch EDC15C2
Jumper 2.2 HDI Bosch EDC15C2
Jumper 2.8 HDI Bosch EDC15C7
Jumpy 2.0 HDI Bosch EDC15C2
Picasso 2.0 HDI Bosch EDC15C2
Synergie 2.0 HDI Bosch EDC15C2
Xantia 2.0 HDI Bosch EDC15C2
Xsara 2.0 HDI Bosch EDC15C2
Xsara Picasso 2.0 HDI Bosch EDC15C2

Peugeout
206 2.0 HDI Bosch EDC15C2
306 2.0 HDI Bosch EDC15C2
307 2.0 HDI 110PS Bosch EDC15C2
406 2.0 HDI Bosch EDC15C2
406 2.2 HDI Bosch EDC15C2
607 2.0 HDI Bosch EDC15C2
607 2.2 HDI Bosch EDC15C2
807 2.0 HDI Bosch EDC15C2
807 2.2 HDI Bosch EDC15C2
Boxer 2.0 HDI Bosch EDC15C2
Expert 2.0 HDI Bosch EDC15C2
Partner 2.0 HDI Bosch EDC15C2

Chrysler
Grand Cherokee 2.7 CRD Bosch EDC15C2
Jeep Cherokee 2.5 CRD Bosch EDC15C2
Jeep Cherokee 2.8 CRD Bosch EDC15C2
PT Cruiser 2.2 CRD Bosch EDC15C2
Voyager 2.5 CRD Bosch EDC15C2

Opel
Vivaro 1.9 16V DI Bosch EDC15C2

Renault
Espace 1.9 dCi Bosch EDC15C2
Espace 2.2 dCi Bosch EDC15C2
Kangoo 1.9 dCi Bosch EDC15C2
Laguna 1.9 dCi Bosch EDC15C2
Megane 1.9 dCi Bosch EDC15C2
Scenic 1.9 dCi Bosch EDC15C2
Scenic 1.9 dTi Bosch EDC15C2
Trafic 1.9 dCi Bosch EDC15C2

Nissan
Almera Tino 2.0 Bosch EDC15C2
X-Trail 2.2 Bosch EDC15C2

Hyundai
Accent 1.5 CRDI Bosch EDC15C2
Elantra 2.0 CRDI Bosch EDC15C2
Matrix 1.5 CRDI Bosch EDC15C2
Santa Fe 2.0 CRDI Bosch EDC15C2
Trajet 2.0 CRDI Bosch EDC15C2

Kia
Carens 2.0 CRDi 16V Bosch EDC15C2
Sorento 2.5 CRDi Bosch EDC15C2

The position of the maps can be different, in fact it is even from my 2.2HDi and admin's one. You have to look at SW numbers for that.

You will have to locate maps manually or find some mappack from same sw number...

I can uderstand that the positions (eg. exact addresses) are definitely different from ECU to ECU, but how about the ordering of the maps and location of floating axes itself? I would expect that map ordering would be the same for all the EDC15C2 out there no matter in which vehicle are fitted - just speculating :?: ..

Are you saying that ONLY ECUs with the same SW version have maps ordered the same? .. and that it varies from SW version to SW version ..

The files are very different. Map ordering is specific to the car manufacturer. PSA group uses one type of map ordering and Fiat group uses other type of map ordering, the same goes for BMW, Honda and all the other cars that use EDC15.
If you have damos file for a specific ECU it will help you when you work with that kind of ECU, also you can use maps factors and offsets in an other type of EDC15 ECU. For the single value limiters you will need some experience to find them.

Thank you for clarifying this, guys 8-)

hinkxx wrote:Thank you for clarifying this, guys 8-)

EDC 15C2 soft 353401

Can you give us some info on what are we looking at in the archive? Pictures seem much alike to those ecuedit posted here.
And how do you use the xls file?

This is useful xls for beginning, you can recognise maps, you can se factors and units.
If you would like to go deeper into the bin, than you need lot more of maps, but with modifying those maps you can achieve pretty good things. Not bad at all, but I did not check if everything is correct.

I think I see what my problem is - I'm using Excel viewer and not full Excel in my windoze VM. I'm running Linux and OpenOffice does not play very nicely if xls has macros.. oh well guess I need to buy MS office :roll: