Dual mass flywheel: solid conversion?

Post your topic here if there is no suitable forum...

Dual mass flywheel: solid conversion?

Postby rwb » Fri May 30, 2014 11:21 pm

What's the prevailing opinion of solid flywheel conversions?

My DMF is getting a bit noisy. Currently at 180hp & 390Nm and hoping to remap.
I really don't know whether to stick with the DMF or get a solid conversion.

So what's your experience and recommendations?

User avatar
rwb
New user
 
Posts: 12
Joined: Sat Aug 18, 2012 1:01 am
Location: Hampshire, England.

Re: Dual mass flywheel: solid conversion?

Postby adriancl » Sat May 31, 2014 7:10 am

Hi mate'
Have made this on my Skoda Octavia Mark II remaped from 105HP to 140HP,with Valeo SMF.After 50.000km springs of disc clutch failed.

User avatar
adriancl
Diamond
 
Posts: 767
Joined: Mon Oct 08, 2012 7:39 pm
Location: Romania

Re: Dual mass flywheel: solid conversion?

Postby Eina » Tue Jun 03, 2014 9:46 pm

rwb wrote:What's the prevailing opinion of solid flywheel conversions?

My DMF is getting a bit noisy. Currently at 180hp & 390Nm and hoping to remap.
I really don't know whether to stick with the DMF or get a solid conversion.

So what's your experience and recommendations?


I think the most important is not to give too much iq/boost on low revs :) And flywheel won't have lots of stress :)

Eina
New user
 
Posts: 7
Joined: Tue Jun 03, 2014 9:35 pm
Location: Vilnius, Lithuania

Re: Dual mass flywheel: solid conversion?

Postby ecuedit » Wed Jun 04, 2014 7:11 pm

Solit is great. Put carbon clutch and it will last forever.
Dual mass is total crap, would punish the guy who invented dual mass peace of crap.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: Dual mass flywheel: solid conversion?

Postby torquechip » Fri Sep 05, 2014 1:01 am

Heard SACHS holds more torque than Valeo

torquechip
New user
 
Posts: 4
Joined: Thu Sep 04, 2014 10:38 am
Location: Europe

Re: Dual mass flywheel: solid conversion?

Postby Serencebey » Sun Sep 07, 2014 6:23 pm

everybody says solid.

what about the chain of the camshafts of that power and torque?

try solid one and see much more bigger problem :)

Serencebey
New user
 
Posts: 17
Joined: Thu Oct 10, 2013 9:20 am
Location: neverland

Re: Dual mass flywheel: solid conversion?

Postby mt500ish » Tue Jan 20, 2015 9:54 pm

Solid and get it lightened and balanced do it to all mine and a good sprung plate.
You sometimes get chatter from the box as the the space between the thrust bearing and clutch change.
The pick up is great :thumbup:

mt500ish
New user
 
Posts: 2
Joined: Tue Jan 20, 2015 9:17 pm
Location: London

Re: Dual mass flywheel: solid conversion?

Postby jurgen » Wed Jan 21, 2015 6:44 pm

thake the set from sachs works oke
regards jurgen

jurgen
New user
 
Posts: 7
Joined: Wed Jan 22, 2014 3:20 pm
Location: holland

Re: Dual mass flywheel: solid conversion?

Postby ecuedit » Wed Jan 21, 2015 10:37 pm

Serencebey wrote:everybody says solid.

what about the chain of the camshafts of that power and torque?

try solid one and see much more bigger problem :)


i drive 500nm+ on solid - perfect.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: Dual mass flywheel: solid conversion?

Postby Grucha1982 » Mon Mar 23, 2015 12:21 am

I mounted solid in few cars in audi skoda vw and no problem.

Grucha1982
New user
 
Posts: 4
Joined: Sun Mar 22, 2015 11:35 pm
Location: Poland

Next

Return to Other

Who is online

Users browsing this forum: No registered users and 1 guest