DPF remove 1.6 HDI 407 EDC16

All about how to remove FAP and DPF filters

Re: DPF remove 1.6 HDI 407 EDC16

Postby doberman » Sun Jul 22, 2012 11:27 pm

it has desactived, but today I have actived it and desactived again for be sure :cry:
after that I see the option of the car and the option "car with DPF" I has changed it for "car without DPF"

I'm sorry I don't have screen shot

doberman
New user
 
Posts: 15
Joined: Thu Jul 19, 2012 1:33 pm
Location: france

Re: DPF remove 1.6 HDI 407 EDC16

Postby ecuedit » Sun Jul 22, 2012 11:46 pm

There should be one more setting at available computers,
something like that, and option enabled / disabled.
First disable it and than try what happens.

For correct namimg i should connect and check, but this should
Be enough for you to find that setting.

User avatar
ecuedit
CARPRO
 
Posts: 2217
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: DPF remove 1.6 HDI 407 EDC16

Postby OdinEidolon » Mon Jul 23, 2012 9:28 am

ecuedit wrote:There should be one more setting at available computers,
something like that, and option enabled / disabled.
First disable it and than try what happens.

For correct namimg i should connect and check, but this should
Be enough for you to find that setting.


As always with Peugeot, there is also the problem that different versions of pp2000 often have different menus and interfaces, so the names might not be exactly the same.

OdinEidolon
Site Admin
 
Posts: 362
Joined: Wed Mar 28, 2012 10:41 am
Location: Belluno, Italy

Re: DPF remove 1.6 HDI 407 EDC16

Postby RPM freak » Mon Jul 23, 2012 12:59 pm

There will be NO fault codes displayed becouse they are delete by ECUsafe. If the car is running normally then there is no DPF related problem.
Did you remove the DPF from the car or is it still on? Did you log the car to see how the engine is working?

There are only 2 products to make the universe work properly - Duct tape and WD40. If it moves and it shouldn't - Duct tape. If it doesn’t move and it should - WD40. Everything else is just stuff.
User avatar
RPM freak
Site Admin
 
Posts: 613
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: DPF remove 1.6 HDI 407 EDC16

Postby doberman » Mon Jul 23, 2012 1:59 pm

Hi

Yes I had delet with ecusafe and physicaly

doberman
New user
 
Posts: 15
Joined: Thu Jul 19, 2012 1:33 pm
Location: france

Re: DPF remove 1.6 HDI 407 EDC16

Postby RPM freak » Mon Jul 23, 2012 11:40 pm

Log the car and post the logs.

There are only 2 products to make the universe work properly - Duct tape and WD40. If it moves and it shouldn't - Duct tape. If it doesn’t move and it should - WD40. Everything else is just stuff.
User avatar
RPM freak
Site Admin
 
Posts: 613
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: DPF remove 1.6 HDI 407 EDC16

Postby Foblas » Fri Jul 27, 2012 4:14 pm

never apply ecusafe for psa edc16! Its stupid and simple and you will have great problems if someting become wrong. You will newer see fault codes. Disconnect any sensor on engine and try to read dtc. Woh - no dtc! And how we will solve invisible problem now?
moreover - regenerations still active, increased fuel consumption, fuel in oil, ever working fan...

I have few files purchased for money. Some point than i cant understand. May be someone have too expirience with edc16 to help to understand the changes?

Lexia3, Galetto, MPPS, BDM100, Ranault Clip, OP-COM
Foblas
New user
 
Posts: 3
Joined: Thu May 31, 2012 4:40 pm
Location: Belarus

Re: DPF remove 1.6 HDI 407 EDC16

Postby doberman » Tue Jul 31, 2012 3:01 pm

hello all,

you have reason for your think about ecusafe, but I don't had a better solution,
the version 2.0.0 don't work for edc16 and 1.3.0 don't work too

the version 1.9.3 work correctly and delet all problems
the vehicle work now correctly and don't have more problem

thanks for your comment and your help is very nice thanks

good look all

doberman
New user
 
Posts: 15
Joined: Thu Jul 19, 2012 1:33 pm
Location: france

Re: DPF remove 1.6 HDI 407 EDC16

Postby hinkxx » Tue Jul 31, 2012 6:09 pm

doberman wrote:the version 1.9.3 work correctly and delet all problems
the vehicle work now correctly and don't have more problem


Good to know .. lets hope it stays this way!

User avatar
hinkxx
Gold
 
Posts: 101
Joined: Sun Jul 15, 2012 10:13 pm
Location: Slovenia

Re: DPF remove 1.6 HDI 407 EDC16

Postby ecuedit » Tue Jul 31, 2012 7:44 pm

doberman, can you be so kind to zip that original,
mod1 - nonworking and mod2 - working bin and post it here that other users can see differences.

User avatar
ecuedit
CARPRO
 
Posts: 2217
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

PreviousNext

Return to FAP / DPF Filter Removing

Who is online

Users browsing this forum: No registered users and 0 guests