DPF off Audi A8 , ASB engine

by **ccorneliuss** » Wed Jun 25, 2014 9:03 am

Hello ,

I was made dpf off for an Audi A8 with ASB engine , 232 CP (171 kw ) , 3000 cmc , and after made dpf off , the cruise control system doesn't worked anymore . I was load the original file and cruise controls worked again . What happen ? What is it wrong ?

Anybody can help me ?

Best Regards ...

by **KostaKosta** » Wed Jul 02, 2014 4:44 pm

ecusafe load.
done manually.
many examples in our forum

by **M780** » Mon Jul 21, 2014 9:26 am

You need to remove 2 sensors plugs.

by **ecuedit** » Mon Jul 21, 2014 12:42 pm

very bad attachment properties...

Next time will help only to posts that contain attachment with properly
filled out required fields. We Will ignore all attachment that has only spaces filled out.
Also filename does not say nothing about vehicle.

If you do not have will and time to enter the data requested,
why somebody will take 20times more time that you needed for low quality post to help you.

Must say that this is not good practise.

With proper attachment values you will see how help comes fast, due to respect to the users who will help.

by **adjfarid25** » Tue Jul 22, 2014 1:29 pm

ecuedit wrote:very bad attachment properties...

Next time will help only to posts that contain attachment with properly
filled out required fields. We Will ignore all attachment that has only spaces filled out.
Also filename does not say nothing about vehicle.

If you do not have will and time to enter the data requested,
why somebody will take 20times more time that you needed for low quality post to help you.

Must say that this is not good practise.

With proper attachment values you will see how help comes fast, due to respect to the users who will help.

Hello,
send me your original file ECU, I'll do the job free for you
regards

by **ecuedit** » Tue Jul 22, 2014 1:51 pm

adjfarid25 wrote:Hello,
send me your original file ECU, I'll do the job free for you
regards

adjfarid25 you do not get a point. Do you understand what i wanted to say with my post?
The idea is opened comunity and quality board. What you have done is discredit.

You come here and you are welcome as everybody else, and forum is for free and help as well. With your 3 posts,
you come to discredit comunity, users, owners with that kind of attitude. This is the first and last warning before permanently ban.
And you will be third person in all history of the forum that gets that kind of warning.

And make at least an introdouce yourself as forum rules require.

Will make it today.

by **BokiRS** » Tue Jul 22, 2014 2:00 pm

You are wright, i think that adjfarid25 missed the point.
Rules are rules and they are same for all.

by **ecuedit** » Tue Jul 22, 2014 3:24 pm

here it is,
check out also how file is equipped.

File that was causing you troubles has bunch of things changed that shold not be changed.

If car is in limp mode and tuner lifts up the limp torque limiter,
to hide problems with modifications that he done, the car will have non working cruise control...

Tuner did turned off some proper things also missed some, but he also masked his work by changing also other things,
but that caused issues with quality.

Flashing procedure at your own risk

by **BokiRS** » Tue Jul 22, 2014 3:45 pm

This is real switch solution, not ecusafe or volta crap.

by **nagliy_root** » Tue Jul 22, 2014 3:52 pm

I think Ecuedit is right - all must be in order. We can help each other - that is the main thing in this forum - but all who can help are busy guys - and they havent a lot of free time. So lets stay rules of forum - and dont try to convert this forum to circus.