BMW E60 530d 0281012190 390905 DPF

by **haosen** » Sat Aug 30, 2014 6:01 pm

Hi
Partially I turned off the dpf. I don't have limp mode, car work correctly but little smoke.
What I have to do to completely turn off dpf?
I dont have damos for this file. I found damos to other file, but is there too much information. I do not know what to pay attention. I do not understand all the abbreviations in these maps :/

On-board computer shows consumption for ~14L/100km in town. :shock: too much
Before cutting dpf showed ~8L/100 in town.

Could someone check this file? I would be gratefull.

Car: BMW E60 530d 0281012190 390905
EDC16C31

by **madymax** » Wed Jan 21, 2015 12:33 pm

Hello
Same problem here.
BMW 530d 2005 automatic....after DPF off by switch and DPF related DTCs off the car drives normally (no limp mode) but the consumtion raised to 14-15l/100km
I suspect that the car is in permanent post-injection but I do not know how to turn that off.
Any help is appreciated.
Thanks

by **Harrycz44** » Mon Jan 26, 2015 8:56 pm

madymax wrote:Hello
Same problem here.
BMW 530d 2005 automatic....after DPF off by switch and DPF related DTCs off the car drives normally (no limp mode) but the consumtion raised to 14-15l/100km
I suspect that the car is in permanent post-injection but I do not know how to turn that off.
Any help is appreciated.
Thanks

Hi post your dump..

by **cloneman** » Fri Jan 30, 2015 1:16 pm

Hello,
i have the same problem.
I removed DPF and instal clear pipe.

530d_1037390905 - i have an mpps file read 1MB

need help with this. (i try remove dpf with volta sensor decoding - it is working, no error codes)
but higher fuel consumption than before i remove dpf.

by **cloneman** » Fri Jan 30, 2015 1:34 pm

Here is my dump:
https://drive.google.com/open?id=0BwdR- ... authuser=0

by **madymax** » Sun Feb 01, 2015 2:13 pm

My ori dump is here : https://www.dropbox.com/s/atl3kc1l4gra6 ... s.bin?dl=0
I tried with switch + DTC off solution and also with Volta/Ecusafe.
The result is the same : car works ok but very high consumption....so seems that this is not the right DPF off method for this car.
Need help to correctly solve it.
Thanks

by **zotto** » Mon Feb 02, 2015 3:33 pm

the only good solution for dpfoff in this car is manual solution, no volta, no ecusafe, no swiftec
when i have to do my first bmw i buy file from other tuner, study his solution and apply in all bmw edc16 ;)

by **cloneman** » Mon Feb 02, 2015 10:03 pm

zotto wrote:the only good solution for dpfoff in this car is manual solution, no volta, no ecusafe, no swiftec
when i have to do my first bmw i buy file from other tuner, study his solution and apply in all bmw edc16 ;)

Hello. Can You help me with this ?
I only need help with my own car.
Thanks so much.