Hi friends. I would like to hear your opinion about this file. It was sent to my friend as a good mood. But he wants to know if all is well? Thank you for your comments

No one can say anything? I looked it up, and in my opinion it is not very good - I do not know much about EDC15

First of all the blocking of EGR for this map is not done correctly, your frield will feel limp mode or dead pedal many times when he wants to push the pedal down.
Tuner increased boost in all map - really bad
Forgot to tune single value boos limiter - bad
This is a mild tuning with only 60 mg, tuner can go with 65 mg for nice power.
I dont see any reason to tune cold SOI maps in full power mode.
Well, response is , dont use this file on the car:) and is not for boost maps is for way of EGR block, car will go in limp mode many times.
I have the same car and i tuned my car over 200 times until to get an optimal map for economy and power.

Thank Juice. I agree with you that it should not be put on the car. Give to a friend that he was divorced.

I read a little on the forums. I want to make myself a file. It is much easier EDC16. I want to know - in the right direction I'm going? I suggest you to consider my Projects. I have not changed all that. One is that I'm interested with this file - this IQ Limited. Also, I read that - example: There are 2 maps DW - the first of them for the second mechanical automatic transaxle front. This is true? And one more question for EGR - how to disable? I love dynamic. I found where they are - but not yet recorded their mappack. thank you

make EGR HW off, SW off dont work for BMW VP44!

Yes you can make EGR OFF. There is a map for EGR where to be active. I think the solution is on this website too.
Search 900 880 sequence in 16 bit and lo-hi, that is atm pressure from wher eGR starts , if you put them 1100 and 1080, EGR will never be open.
Search : 2951 2931 900 880 3931 3881. First two are minimum temepratures and last two are maximum temperatures. 3931 = 120, convert them with 273 factor.
The tuned map looks better but not at full power for how much this engine can handle.
As an idea you can go with 65 mg of fuel from 2250 to 4000 rpm and 2300 mbar, its safe. Put svbl to 2400 as is it and aTM limiter to 2400 also. Request 2300. In advance map you can add 1.5 degrees after 2500 on last column. Smoke map also you can keep AFR to 16, its okay, i mean put 1075 last column with 66 mg. Reques in driver wish 67 , smoke = 66 and torque 65.

Hello. I want very little to deal with this computer. Thank you for your advice. I have just a few days studying it and read a lot.

Thank Juice. I will take into account your advice. try to be quick to put the result.

Hello. I was a little changed a few maps for your advice. I have one question about the map IQ Limited. How to change it? thank you