BIN to SGO converter

by **bestian** » Sun Apr 30, 2017 1:27 am

Hello,

does anybody know, how to convert tuned,binary file back to .SGO so that original ODIS with VAS5054 can program it into my car?

I do not have the programming cable for EDC16 yet and I need to switch off DPF, because after ECU update with ODIS, my DPF-OFF mod was rewritten with original Audi file...

But I managed to extract SGO file into 2 .bin files - one 2MB and one 512k bin, edited them to have DPF off again and now, I need to put them back together and flash it with ODIS to my car (because I have access to original ODIS and VAS cable)

Anybody can help me?

by **JimmyLIN** » Wed Aug 30, 2017 4:59 am

what is the version of odis? maybe update it for a try

by **bestian** » Wed Aug 30, 2017 1:49 pm

odis loads only .SGO file and complete file...

and because SGO extractor split the original file into 2, there is no chance i want to even try to load that half-file to my car with odis...

I have odis service v.4 and engineering v.6

by **hananes** » Sun Sep 30, 2018 12:07 pm

Sorry to rehash this topic, but i have the same question. Is there any news?

by **DW1976** » Sun Nov 11, 2018 9:56 pm

hi
ask for the service magicmotorsport
regards

by **pizzocaro** » Wed Mar 12, 2025 12:18 am

Hello everyone, good evening! I ask for a minute of your time to help if possible, I'm from Brazil, as you know the technological resources here are scarce, with that I'm going to tell you about my project, I installed the DSG DQ250 gearbox in my Golf GTI MK3 1994, I used the Fueltech FT550 module to manage everything, but the gearbox I bought is from the Golf GTI MK7 2019 with MQB platform and the Fueltech module is not compatible with this MQB platform, so I took a mechatronics from the VW Jetta year 2010 that uses DQ250 and is not an MQB platform, and I put it in the 2019 gearbox but it didn't work so I cloned the Jetta mechatronics to the Golf mechatronics and it didn't work either, after a lot of study the reason it didn't work is because the gear ratios are incompatible between the gearboxes, so I needed to edit the file extracted from the Golf mechatronics so that I could get the relationship information and insert it into the Jetta mechatronics file, so I believe it will work, does anyone have any information on how to do this? Please thank you very much!