Hello,

Can anyone tell me in this file, where are the limiters(IQ, IQ temp, NM limiter, Single value ones)?
I`m not talking about the basic remap maps, but for let`s say if i want stage 3, if there are such limitations, "hidding somewhere".
What i think so far:
1. After Torque limiter, there is some strange map 2x2 at 1D5B78 with 30000 values?
2. Right after it, there is some straight line at 3000 value(may be NM with 0.1 factor) at 1D5BA0 (64 bytes)

Is this map the so called 3000rpm limit, when it`s stand still?
1D5C26 3x1 . I suspect some RPM -> 2800 3050 3150 and map is 100% 10% 0% ?? Any thoughts?

What is this map at 1ED186 ? Some said, that is an Injection duration, but for what? Very strange durations.

Also, The switches for MAF and MAP are at
1d8391
1d8396
1d8398
Is this right?
On what smoke limiter is this file?

Anyone has Damos or more full mappack for this file? ECU is 03G906016KN, Software is 391503

File is here.
https://www.sendspace.com/file/h77hsf