Audi A3 110 BHP ASV

Help and tips about your tune, post your work in here.

Audi A3 110 BHP ASV

Postby paulograve » Sun Mar 27, 2016 12:09 am

Please comment/advise, this is stock car, gt1749v, 0,205 nozzles
Thanks
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

paulograve
New user
 
Posts: 23
Joined: Sat Mar 26, 2016 11:12 pm
Location: Portugal

Re: Audi A3 110 BHP ASV

Postby maki4evers » Sun Mar 27, 2016 12:24 am

paulograve wrote:Please comment/advise, this is stock car, gt1749v, 0,205 nozzles
Thanks


what we have to comment ? this file looks like ori not mod

maki4evers
Diamond
 
Posts: 341
Joined: Fri Jan 29, 2016 1:16 am
Location: Poland

Re: Audi A3 110 BHP ASV

Postby paulograve » Sun Mar 27, 2016 12:07 pm

maki4evers wrote:what we have to comment ? this file looks like ori not mod


It should be 2 versions on this .ols file, the original and remap v13.2
You just need to go to project/open version and select the remap v13.2

I will upload a .bin file with my remap.

Thanks
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

paulograve
New user
 
Posts: 23
Joined: Sat Mar 26, 2016 11:12 pm
Location: Portugal

Re: Audi A3 110 BHP ASV

Postby maki4evers » Sun Mar 27, 2016 12:56 pm

hey.

now file is working.

your mod is not bad but is few things to the improvement.

in your boost map you changed X axis 35 to 40 without changing map , why ?
are you tested this mod in car ? because you changed n75 map but if you not tested how are you know how much and where change this map ? your smoke map is some joke ? you afr is about 8 ?? all map to the improvement .

cheers

maki4evers
Diamond
 
Posts: 341
Joined: Fri Jan 29, 2016 1:16 am
Location: Poland

Re: Audi A3 110 BHP ASV

Postby paulograve » Sun Mar 27, 2016 1:19 pm

Hi
Ok, I am very new to remaping, just learned the basic.
Yes, the file is in my car and been testing it, the car runs ok, more power than original but maybe it could be better.
I have been developing this file for a few months, as you can see is remap number 13!!
I increased boost by 200gr
N75 was deacreased 13% on 51mg IQ collum to reduce boost spikes, there are still some little spikes on low rpms but boost is ok on requested and read.
My smoke map I made it this way because it was easier just to not limit and allow 51mg from Torque limiter, I have no visible smoke on all rpms full throttle.

What you suggest?!

Thank you!

paulograve
New user
 
Posts: 23
Joined: Sat Mar 26, 2016 11:12 pm
Location: Portugal

Re: Audi A3 110 BHP ASV

Postby maki4evers » Sun Mar 27, 2016 1:24 pm

have you some logs ? because on this smoke map your car should smoke like a train ;)

maki4evers
Diamond
 
Posts: 341
Joined: Fri Jan 29, 2016 1:16 am
Location: Poland

Re: Audi A3 110 BHP ASV

Postby paulograve » Sun Mar 27, 2016 3:16 pm

Yes, what groups you need? 11 I have from yesterday.
From my calculation my maf is doing more than 1000mg, and fuel is limited by nozzles to max 51mg, so afr is above the value to make smoke...
Am I correct??

paulograve
New user
 
Posts: 23
Joined: Sat Mar 26, 2016 11:12 pm
Location: Portugal

Re: Audi A3 110 BHP ASV

Postby maki4evers » Sun Mar 27, 2016 3:24 pm

group 3 to see your maf sensor. because if maf is ok you can change you smoke map like it should be . and your nozzles not limiting you to 51. you can get about 140 HP from your engine. on your mod you can get about 130 HP.

maki4evers
Diamond
 
Posts: 341
Joined: Fri Jan 29, 2016 1:16 am
Location: Poland

Re: Audi A3 110 BHP ASV

Postby paulograve » Sun Mar 27, 2016 5:30 pm

Thanks for your help!
Ok, here is a log from group 3 and 11 made 10 minutes ago! I t was not a very long road so its in 3rd gear WOT
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

paulograve
New user
 
Posts: 23
Joined: Sat Mar 26, 2016 11:12 pm
Location: Portugal

Re: Audi A3 110 BHP ASV

Postby maki4evers » Sun Mar 27, 2016 11:24 pm

mate you must make dynamic logs on 3th gear from 1500 to 4200 RPM full throttle ! not on low RPM

maki4evers
Diamond
 
Posts: 341
Joined: Fri Jan 29, 2016 1:16 am
Location: Poland

Next

Return to Rate My Tune

Who is online

Users browsing this forum: No registered users and 0 guests