AUDI A2 1.4TDI 75Hp

by **stanleybg** » Thu Jun 09, 2016 3:23 pm

Here is ori file and modified by me.Please take a look and tell me what can be better and what is not good.

by **maki4evers** » Thu Jun 09, 2016 8:05 pm

hey mate.

in my opinion you need change few things. DW should have higher values, smoke map should have little higher values in last column. in your mod DW,smoke map and TL have the same highest values. Tl is to the improvement because i think you clutch will not be happy with 38% more torque in 1400 RPM. Duration maps untouched, if you want get 65 mg fuel you need higher boost pressure like this in your mod. im not pro but i think that ;)

cheers

by **stanleybg** » Fri Jun 10, 2016 5:07 pm

I reduced torque limiter in lower RPM.I did not touch duration maps , because i think it will decalibrate injectors.In driver wish i set maximum IQ after 80% trothle.I rised boost i think to match for 65mg/stroke fuel.Check my file :)

by **stanleybg** » Mon Jun 13, 2016 8:20 am

Please someone tell me what is maximum safe boost of turbine here ?
Thanks in advance :)

by **Black** » Mon Jun 13, 2016 11:27 pm

1.162bar

by **stanleybg** » Tue Jun 14, 2016 8:13 am

stock is 1.1bar.How then remapers do this car to 101hp ? :crazy:

by **Black** » Thu Jun 16, 2016 4:36 pm

Max stock boost for that engine is only 0.995 :thumbup:

I was tune my good friend car VW POLO 9N 2006 with that small 1.4 TDI.
Stock engine before tune 75KM/197Nm
After tune now 101HP /269 Nm

by **stanleybg** » Thu Jun 16, 2016 5:14 pm

Hmmm.As i see in my ori file max turbo boost is 1.1Bar or may be someone remaped it before ? Can you look at my ori file turbo map please :)

by **Black** » Thu Jun 16, 2016 6:24 pm

Yeap, there was someone before and he doing nice s**t :crazy: and what's worse he delete DW map :shock: :thumbdown:
If you wanna do this right, you should start tune on not touched basic file.

Your file firewere information
bosch part number0281010220
softwere ID 045906019G SG1207
Maybe someone was write tuned file from other car. Check is that number are from your EDC plate in the car.

Cheers, Mike.

by **stanleybg** » Thu Jun 16, 2016 9:18 pm

I found another source and the same SW and HW number.VAG SUITE says no driver wish map on this file too.And Tubro map i again 1.1bar max.
Here is the source - http://www.chip-tuner.hu/original_ecu_files/files/Audi/
It seem that this car is 1.1bar and driver wish map is what i think is.