Hi everyone,

This is my first attempt at a "proper" tune. Org and Mod files attached.
I'm aiming for about 300NM and about 138bhp (102kW), keeping the torque at about 300NM is to simply try and preserve the clutch. The car has just had a Valeo solid flywheel conversion with new clutch. I'm also keeping the torque curve quite "shallow" to try and gently load the clutch up on full acceleration.
I would appreciate your comments! I've changed a few axis as I'm injecting 72.5mm3 at around 2500rpm and so smoke\duration\rail pressure\advance axis have been modified to accomodate this and possible future mods.
I would attach the WinOLS map pack, but not sure if you can export the map pack in the demo version? I've been making mods using TunerPro and have made an XDF file for that.



Axis Changed:

71086 IQ Axis for Advance, Pre-Injection, Rail Pressure etc

Maps changed:

7111D 1x1 EGR Switch
724AE 20x16 Injector Duration (Axis modded and values extrapolated)
72D00 16x16 Injection Advance (Axis modded and values added up to IQ 75)
772A2 10x8 Turbo vs Fuel Temp
77C10 10x10 Turbo vs Ambient Pressure
77DF4 10x16 Turbo Pressure request
7803C 10x16 Turbo Pressure request
7833C 4x8 IQ vs Fuel Temp High
783A0 6x8 IQ vs Fuel Temp Low
78772 19x1 Torque Limiter
787E0 16x16 Smoke
78EF2 6x8 Driver Wish
78F76 6x8 Driver Wish
79BB6 16x16 Rail Pressure
7A00E 6x8 Rail Pressure Limiter
7AE40 16x16 Injection Advance
7B040 16x16 Pre-Injection Advance
7B290 20x16 Injector Duration

So.... Is my first go any good?

PS - Forgot to say I've yet to upload this to the ECU.... I'm goi ng to give the car a good full service first (Oil and filters, cambelt etc) :angel: