Bosch LPS 002 2WD Inertia Rolling Road Chassis Dyno/Dynamometer with new Sport Devices SP-1 Controller. I imported this from Germany as a project and have since fitted adjustable 8 adjustable machine feet and renewed it to a useable condition, I have also purchased a single phase high power fan and 4 ramps along with 2 additional blower fans. It was originally built to be installed sank into a floor, however with the ramp additions and adjustable machine feet it can now be ran above ground. The bearings are in good condition, a new crank trigger wheel has been machined and supplied by Henning Larsen of Dynomasterpro who now works closely with Jose at Sport Devices. It is basically ready to go and will only need brief setup of software on a suitable computer to get going. The air bags and valve appear to work to bed in and out the motors.

I am moving away and clearing my workshop of hardware so the Dyno is now available to purchase. I can assist on this end with loading with a forklift given notico but please bear in mind it weighs 800KG. Is around 2.3M long and 80cm wide before the ramps come into question. The dyno was originally delivered in the back of a new MAN TGA van for reference stacked on a couple of pallets.

Please contact if interested. Currently located WV10 7DB, Four Ashes, UK

Asking £10500 elsewhere but serious offers for those who know what its worth would be considered here as quick sale is needed.

£7800 final offer before it goes into storage.