2009 Ford Focus 1.6 TDci DPF removal

by **chris2006** » Tue Feb 23, 2016 2:07 pm

Hi All

I have removed the DPF filter from a 2009 ford focus 1.6 TDCi due to it being blocked,

Is it possible to read the file from the car with KWP2000 Plus and use Ecusafe to remove the dpf from the ECU?

Many Thanks

Chris2005

by **maro123** » Wed Feb 24, 2016 7:54 am

HI! you have a backup ori?
I think it is bad checksum.
you need try to read and program by bdm.

Best regards

by **chris2006** » Wed Feb 24, 2016 2:11 pm

Hi Maro123

I've only removed the filter from the DPF

I have not made any alterations to the ECU

I need advice on the best software to remove the DPF from the ECU

by **maro123** » Thu Feb 25, 2016 10:15 am

HI!
DPF Remover-free- it gives you free solution on this ecu

by **Gibon** » Thu Feb 25, 2016 7:32 pm

DPF remover free doesnt provide good solution, only manual solution is good

by **chris2006** » Fri Feb 26, 2016 4:00 pm

Hi

Whats the best obd flash tool for doing a low volume of cars ?

I dont mind spending the money to get something worth while

I'm fed up with the cheap stuff off eba* that dosnt work

Regards

Chris2006

by **morphvale** » Sat Feb 27, 2016 12:04 pm

chris2006 wrote:Hi All

I have removed the DPF filter from a 2009 ford focus 1.6 TDCi due to it being blocked,

Is it possible to read the file from the car with KWP2000 Plus and use Ecusafe to remove the dpf from the ECU?

Many Thanks

Chris2005

For this car and ECU model, ecusafe or volta should not be used. They delete the DTC tables and don't disable full functionality of DPF.
Manual method by 3 switches is best to use, check the forum, it has been discussed before and it's easy to find.