Citroen 2.0 hdi RHY chip_bad

Posts related to specific vehicles, or any other general tuning info.

Citroen 2.0 hdi RHY chip_bad

Postby Den2008 » Thu Sep 14, 2017 7:39 pm

Hey. Tell me what's wrong with my firmware. After the modification, the car is not gaining momentum, and it is audible as if it works on 3 cylinders ... I enclose the original firmware and the chip (chip3.bin). + Maps
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Den2008
New user
 
Posts: 19
Joined: Fri Mar 03, 2017 8:26 am
Location: Minsk

Re: Citroen 2.0 hdi RHY chip_bad

Postby PT360 » Mon Sep 25, 2017 11:50 am

I see you deleted egr on file, whe you do that on edc15c2 by switch yopu shoul disconect egr plug or else it will run rugh.

PT360
Silver
 
Posts: 65
Joined: Sat Sep 19, 2015 7:20 pm
Location: Spain

Re: Citroen 2.0 hdi RHY chip_bad

Postby Den2008 » Mon Sep 25, 2017 12:14 pm

PT360 wrote:I see you deleted egr on file, whe you do that on edc15c2 by switch yopu shoul disconect egr plug or else it will run rugh.

it is not in егр. I think that the problem svrpl maybe it?

Den2008
New user
 
Posts: 19
Joined: Fri Mar 03, 2017 8:26 am
Location: Minsk

Re: Citroen 2.0 hdi RHY chip_bad

Postby PT360 » Mon Sep 25, 2017 12:45 pm

As i understand, if you demand 1400 bar of rail and the svrl is not touched and is at 1350 as i think is on this file you wont get the desire 1400, also it wont cause bad running of the engine.
1- did you unplug the egr vaccum pipe to the valve?
2-have you diagnose the car after loading the moded file? is ther any DTC?

PT360
Silver
 
Posts: 65
Joined: Sat Sep 19, 2015 7:20 pm
Location: Spain

Re: Citroen 2.0 hdi RHY chip_bad

Postby Den2008 » Mon Sep 25, 2017 4:15 pm

PT360 wrote:As i understand, if you demand 1400 bar of rail and the svrl is not touched and is at 1350 as i think is on this file you wont get the desire 1400, also it wont cause bad running of the engine.
1- did you unplug the egr vaccum pipe to the valve?
2-have you diagnose the car after loading the moded file? is ther any DTC?

in the maps "SVRPL" I corrected 1350 for 1400.
1 - I did not detach the EGR pipe from the valve
2 - did the diagnostics, it seems that errors were not critical. I watched the data in real time, with pressure everything was fine.

Den2008
New user
 
Posts: 19
Joined: Fri Mar 03, 2017 8:26 am
Location: Minsk

Re: Citroen 2.0 hdi RHY chip_bad

Postby PT360 » Mon Sep 25, 2017 4:32 pm

please disconect the vaccum pipe that goes from solenoid to egr vaccum capsule and tap with a ball or a screw and test.

PT360
Silver
 
Posts: 65
Joined: Sat Sep 19, 2015 7:20 pm
Location: Spain

Re: Citroen 2.0 hdi RHY chip_bad

Postby Den2008 » Mon Sep 25, 2017 4:44 pm

PT360 wrote:please disconect the vaccum pipe that goes from solenoid to egr vaccum capsule and tap with a ball or a screw and test.

I'll try so ...
what ball or screw?

Den2008
New user
 
Posts: 19
Joined: Fri Mar 03, 2017 8:26 am
Location: Minsk

Re: Citroen 2.0 hdi RHY chip_bad

Postby PT360 » Mon Sep 25, 2017 5:19 pm

CLOSE THE RUBBER TUBE WHEN YOU UNPLUG IT FROM THE VALVE WITH A SCREW OR WHATEVER YOU HAVE AT HAND SO NO VACCUM WILL BE LOST.

PT360
Silver
 
Posts: 65
Joined: Sat Sep 19, 2015 7:20 pm
Location: Spain

Re: Citroen 2.0 hdi RHY chip_bad

Postby Den2008 » Mon Sep 25, 2017 5:39 pm

PT360 wrote:CLOSE THE RUBBER TUBE WHEN YOU UNPLUG IT FROM THE VALVE WITH A SCREW OR WHATEVER YOU HAVE AT HAND SO NO VACCUM WILL BE LOST.

understood. Thank you so much! I will try.

Den2008
New user
 
Posts: 19
Joined: Fri Mar 03, 2017 8:26 am
Location: Minsk

Re: Citroen 2.0 hdi RHY chip_bad

Postby uberderv » Tue Sep 26, 2017 12:46 am

Is your car fitted with the Doser valve? When disabling the EGR system this must be either isolated from the Vacuum so it remains open or disabled via the file like the other EGR valve.

uberderv
Silver
 
Posts: 78
Joined: Sat Aug 11, 2012 11:58 am
Location: North West

Next

Return to General tuning

Who is online

Users browsing this forum: No registered users and 3 guests