1.9 tdi atd 100@140 overboost

Help and tips about fine tuning. Post your questions or how to in here.

1.9 tdi atd 100@140 overboost

Postby wilq01 » Fri Feb 10, 2017 6:14 pm

Hi everybody,

Can You tell me what can cause a problem with my overboosting turbo?

I ask for 1.2bar max and turbo goes up to 1.315. SVBL is set to 2.25bar, but turbo seems to don't care about it and is boosting more than this. I also wanted to ask You about correct values of N75. I think that mine are to high.

I am thinking that maybe it's because of broken N75 valve or maybe maf sensor. What do You think guys?

003 and 011 group logs:
http://vaglog.pl/log-003_011_nOO4Aaj.html

wilq01
New user
 
Posts: 24
Joined: Sat Apr 30, 2016 4:26 pm
Location: Poland

Re: 1.9 tdi atd 100@140 overboost

Postby sandor1987 » Fri Feb 10, 2017 6:37 pm

dutycyle is to high..

sandor1987
Diamond
 
Posts: 295
Joined: Sun Sep 08, 2013 5:21 pm
Location: Netherlands

Re: 1.9 tdi atd 100@140 overboost

Postby wilq01 » Sat Feb 11, 2017 4:52 pm

yes, but what can cause this problem?

wilq01
New user
 
Posts: 24
Joined: Sat Apr 30, 2016 4:26 pm
Location: Poland

Re: 1.9 tdi atd 100@140 overboost

Postby mmparts » Sun Feb 12, 2017 5:56 pm

On PD engine, as it is (atd 101ps) you have one module with many vacuum hoses in it. I had same situation and problem was there. Replaced the vacuum module and it's ok. Mine was Ibiza 6l ATD and after remap on 1-2-3th gear there was no problem but on long distance when hit the pedal a lot it overboosts and get in service(CHECK indicator on dashboard) After that I turn off the engine than start it up again and it's ok until next long full throttle test on high gear. Hope i helped.

mmparts
Bronze
 
Posts: 40
Joined: Wed Nov 30, 2016 12:36 am
Location: Bulgaria

Re: 1.9 tdi atd 100@140 overboost

Postby wilq01 » Mon Feb 13, 2017 1:58 pm

I have stock N75 map (picuture in attachment). It is scaled to 45mg. My map ask for 60mg maxiumum.

Maybe this is a problem. If that is the problem I can rescale the map to 60mg but what values should I put in 60mg column? Any advices?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

wilq01
New user
 
Posts: 24
Joined: Sat Apr 30, 2016 4:26 pm
Location: Poland

Re: 1.9 tdi atd 100@140 overboost

Postby Houdini » Mon Feb 13, 2017 2:03 pm

wilq01 wrote:I have stock N75 map (picuture in attachment). It is scaled to 45mg. My map ask for 60mg maxiumum.

Maybe this is a problem. If that is the problem I can rescale the map to 60mg but what values should I put in 60mg column? Any advices?


if you want to do it that way it is going to take allot of logging if you change the axis data. leave it stock it works better

User avatar
Houdini
Diamond
 
Posts: 298
Joined: Sun Jul 10, 2016 11:13 am
Location: All over The World

Re: 1.9 tdi atd 100@140 overboost

Postby wilq01 » Mon Feb 13, 2017 2:25 pm

So should I do anything with this -> N75 up to 95% and overboost +/- 0,1 bar?

Or leave it like this and wait for something to break?

I was thinking that maybe I should go to mechanic to let him see my turbo - maybe something is stuck inside.

wilq01
New user
 
Posts: 24
Joined: Sat Apr 30, 2016 4:26 pm
Location: Poland

Re: 1.9 tdi atd 100@140 overboost

Postby silenttune » Mon Feb 13, 2017 3:11 pm

You must log the 011 turbo in 3rd gear from 1000rpm to max rpm and look for Requested boost vs actual boost and see if the ECU is actually controlling the turbo this will let you know if you have a sticking turbo.

silenttune
Bronze
 
Posts: 38
Joined: Mon Aug 29, 2016 6:46 pm
Location: england

Re: 1.9 tdi atd 100@140 overboost

Postby silenttune » Mon Feb 13, 2017 3:29 pm

Here you can see boost going high and can also see ecu frantically trying to control it via duty cycle to n75 valve. this is what your looking for.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

silenttune
Bronze
 
Posts: 38
Joined: Mon Aug 29, 2016 6:46 pm
Location: england

Re: 1.9 tdi atd 100@140 overboost

Postby wilq01 » Mon Feb 13, 2017 4:01 pm

Hello, my log was made on 3rd gear and we can see that ecu is trying to control boost via duty cycle by n75 valve.

So should I assume that everything is ok?

wilq01
New user
 
Posts: 24
Joined: Sat Apr 30, 2016 4:26 pm
Location: Poland

Next

Return to Fine Tuning, Testing, Diagnostics and Analysis

Who is online

Users browsing this forum: No registered users and 0 guests