EDC15P ecu blocked

Posts relating to recovering blocked ECUs

Return to Recovering ECU

EDC15P ecu blocked

Postby gazdagattila » Sun Oct 02, 2016 10:15 am

Hello, I have an Audi a3 1.9tdi 96kw with Bosh EDC15P ecu. I tryed to tune it but i think i messed up the checksum, i'm using Fgtech Galetto. If i try to read the ecu with pin 24 grounded and resetet as i read and using driver audi-a3-edc15p it reads it to 28% then stops.
If i try to use any Boot Tool in the drivers it wont even start.
Can anyone tell me what to do? how to write the original file back or how to read is properly?
I tried via OBD and i tried with Pin out:
4-5 to ground
2 +12v
36 +12v
16 -k line(i haave on galetto k-low, k-high, but o dont have K-line) i tried them all.

Thank you

gazdagattila
New user
 
Posts: 2
Joined: Sat Oct 01, 2016 10:47 am
Location: Romania

Re: EDC15P ecu blocked

Postby sandor1987 » Sun Oct 02, 2016 11:20 am

gazdagattila wrote:Hello, I have an Audi a3 1.9tdi 96kw with Bosh EDC15P ecu. I tryed to tune it but i think i messed up the checksum, i'm using Fgtech Galetto. If i try to read the ecu with pin 24 grounded and resetet as i read and using driver audi-a3-edc15p it reads it to 28% then stops.
If i try to use any Boot Tool in the drivers it wont even start.
Can anyone tell me what to do? how to write the original file back or how to read is properly?
I tried via OBD and i tried with Pin out:
4-5 to ground
2 +12v
36 +12v
16 -k line(i haave on galetto k-low, k-high, but o dont have K-line) i tried them all.

Thank you



pin 37 to +12V!!!!

upload your files ;)

sandor1987
Diamond
 
Posts: 295
Joined: Sun Sep 08, 2013 5:21 pm
Location: Netherlands

Re: EDC15P ecu blocked

Postby gazdagattila » Sun Oct 02, 2016 12:47 pm

Sorry it was conected to pin 37 i wrote wrong.
So... If i reset it on pin 24 to gnd and deconect pin from gnd. reading goes to 28% and stops.
if i connect pin 24 to gnd and dont disconect it before reading it says ecu number not found like in picture.
I use the driver from the picture.
What i'm doing wrong?
Thank you for your reply i am stuggleing with this ecu for 4 days.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

gazdagattila
New user
 
Posts: 2
Joined: Sat Oct 01, 2016 10:47 am
Location: Romania

Re: EDC15P ecu blocked

Postby sandor1987 » Sun Oct 02, 2016 8:18 pm

write with obd protocol!

do you have mpps?

sandor1987
Diamond
 
Posts: 295
Joined: Sun Sep 08, 2013 5:21 pm
Location: Netherlands

Re: EDC15P ecu blocked

Postby ivojk » Mon Oct 03, 2016 8:39 am

Desolder flash and write original with programmer

BR

ivojk
Bronze
 
Posts: 38
Joined: Thu Jul 18, 2013 10:12 am
Location: Bulgaria

Re: EDC15P ecu blocked

Postby McLarenF1 » Tue Oct 04, 2016 12:45 am

Kwp2000+ it is magnificent to recover this type of switchboards for obd To my always I me work wonderfully

McLarenF1
New user
 
Posts: 11
Joined: Sun Mar 22, 2015 5:32 pm
Location: Sevilla

Re: EDC15P ecu blocked

Postby kernel32 » Thu Oct 06, 2016 4:12 am

ivojk wrote:Desolder flash and write original with programmer

BR

i think this is the best option for you.to proper read it and write after you will need a good programmer like Galep-5

http://www.alientech-to.it/index.php/en ... inmenu-147

if u dont want to desolder the eprom-which i would choose if i was in your place because i like clean work i would

use bdm tool like this for example https://www.youtube.com/watch?v=5KPvVKLoD04

hope i helped..

kernel32
New user
 
Posts: 19
Joined: Thu Mar 19, 2015 2:05 pm
Location: greece

Re: EDC15P ecu blocked

Postby Dakta » Fri Oct 07, 2016 12:09 am

use bdm tool like this for example https://www.youtube.com/watch?v=5KPvVKLoD04


With all due respect - NO.

Dakta
Silver
 
Posts: 71
Joined: Thu Jan 10, 2013 10:09 am
Location: wakefield


Return to Recovering ECU

Who is online

Users browsing this forum: No registered users and 1 guest