Engine not start after flashing with no ignition - HELP !!!

Posts relating to recovering blocked ECUs

Return to Recovering ECU

Engine not start after flashing with no ignition - HELP !!!

Postby fux0red » Sun May 15, 2016 10:03 am

Hello everyone,

Car: BMW 535d 210kw, 2007, automatic, facelift with CAN.

Yesterday i've done a big mistake. Readed ECU map with no ignition, everything was ok, map been readed. But when i came back with tunned file and tried to flash it without car ignition, Galletto showed me an error. Map even did not been flashed, but car does not start any more.
Later on i realized that i did not turn on ignition, just forgot as these start / stop cars are not usual for me. I came back to flash the map and everything was ok. Map has uploaded now, but car does not start anyway. Screen shows the message "Fault in drive". Starter is spinning, but engine does not start. Seems that something is blocking the fuel. I guess that some king of module killed when i tried to flash the map without ignition. In addition, i can not read ECU fault codes, something is blocking to do it also. Reading other things like gear box, cluster is available.
Maybe there is someone who has faced with this issue and knows how to fix it ? I would highly appreciate for any support.

Thanks in advance mates !


BR,
Gary

fux0red
New user
 
Posts: 1
Joined: Sun May 15, 2016 9:48 am
Location: Lithuania

Re: Engine not start after flashing with no ignition - HELP

Postby CarTuning » Mon May 16, 2016 9:02 pm

fux0red wrote:Hello everyone,

Car: BMW 535d 210kw, 2007, automatic, facelift with CAN.

Yesterday i've done a big mistake. Readed ECU map with no ignition, everything was ok, map been readed. But when i came back with tunned file and tried to flash it without car ignition, Galletto showed me an error. Map even did not been flashed, but car does not start any more.
Later on i realized that i did not turn on ignition, just forgot as these start / stop cars are not usual for me. I came back to flash the map and everything was ok. Map has uploaded now, but car does not start anyway. Screen shows the message "Fault in drive". Starter is spinning, but engine does not start. Seems that something is blocking the fuel. I guess that some king of module killed when i tried to flash the map without ignition. In addition, i can not read ECU fault codes, something is blocking to do it also. Reading other things like gear box, cluster is available.
Maybe there is someone who has faced with this issue and knows how to fix it ? I would highly appreciate for any support.

Thanks in advance mates !


BR,
Gary


What you did? How.....

Without ignition(dash lamps off) cannot do nothing, no read no writing. ECU need power and if ingition is OFF, no power etc. So....

CarTuning
Silver
 
Posts: 73
Joined: Mon Jun 17, 2013 8:08 pm
Location: Lappiland

Re: Engine not start after flashing with no ignition - HELP

Postby Alfred » Sun Sep 18, 2016 9:54 am

Hello
Did you wrote the original map on ecu or tuned map?

Best regards Alfred

Alfred
New user
 
Posts: 2
Joined: Sun Sep 18, 2016 9:43 am
Location: Estonia

Re: Engine not start after flashing with no ignition - HELP

Postby serwissts » Tue Jan 03, 2017 12:14 pm

Probably you need write file on bdm bench if you have all original files

serwissts
New user
 
Posts: 18
Joined: Sun Nov 22, 2015 11:46 am
Location: Poland / UK - Poole

Re: Engine not start after flashing with no ignition - HELP

Postby CarTuning » Sun Jan 08, 2017 1:29 pm

I have read, that car can only read w/o ignition on.

Hit Start- button, but do not hit brake same time. Then try to writing.

CarTuning
Silver
 
Posts: 73
Joined: Mon Jun 17, 2013 8:08 pm
Location: Lappiland


Return to Recovering ECU

Who is online

Users browsing this forum: No registered users and 2 guests