Bosch EDC16 REMAP | Torque/Power Calculation

Questions and answers related to map factors, units, offsets. How to...

Bosch EDC16 REMAP | Torque/Power Calculation

Postby goncaloasantos » Thu Dec 11, 2014 6:35 pm

Hi everyone, i have Alfa Romeo GT 1.9 JTD 150hp. i've been made a map for my car, i turn off my egr and put same tweeks on torque limiter, pressure limiter, injection time, Turbo boost..

i don't know how calculate the power and torque of this map, because i dont have mg/stroke in fuel quantity, i have torque,RPM..

As i know, EDC16 have diferent way to define injetion, is not mg/stroke.. how can i calculate the power and torque of this map?


Thank you.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

goncaloasantos
New user
 
Posts: 7
Joined: Wed Nov 19, 2014 2:33 am
Location: Portugal

Re: Bosch EDC16 REMAP | Torque/Power Calculation

Postby goncaloasantos » Fri Dec 12, 2014 2:44 am

Or i use this map to calculate the real torque and power? i'm a little bit lost.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

goncaloasantos
New user
 
Posts: 7
Joined: Wed Nov 19, 2014 2:33 am
Location: Portugal

Re: Bosch EDC16 REMAP | Torque/Power Calculation

Postby biela » Fri Dec 12, 2014 10:18 am

The second map looks like torque limiter in Nm.
With the first map (Nm to IQ converter) you get mm3/hub.

User avatar
biela
Gold
 
Posts: 124
Joined: Wed Oct 31, 2012 5:14 pm
Location: Spain

Re: Bosch EDC16 REMAP | Torque/Power Calculation

Postby przemek4net » Sat Dec 13, 2014 11:19 pm

are y sure nm2mm3 and not 2mg?

przemek4net
New user
 
Posts: 3
Joined: Fri Jan 17, 2014 10:05 pm
Location: PL/Wroclaw

Re: Bosch EDC16 REMAP | Torque/Power Calculation

Postby biela » Sun Dec 14, 2014 10:16 pm

Yes, in Opel is mm3.

User avatar
biela
Gold
 
Posts: 124
Joined: Wed Oct 31, 2012 5:14 pm
Location: Spain

Re: Bosch EDC16 REMAP | Torque/Power Calculation

Postby AFR » Thu Dec 18, 2014 9:53 pm

torque calculation....injection qty*1.5*no of cylinders

User avatar
AFR
Silver
 
Posts: 57
Joined: Tue Nov 11, 2014 6:48 am
Location: South africa

Re: Bosch EDC16 REMAP | Torque/Power Calculation

Postby ezippo » Tue May 26, 2015 11:18 pm

thx

ezippo
New user
 
Posts: 1
Joined: Tue May 26, 2015 7:34 pm
Location: France

Re: Bosch EDC16 REMAP | Torque/Power Calculation

Postby Anti » Wed May 27, 2015 8:55 am

AFR wrote:torque calculation....injection qty*1.5*no of cylinders

No way... Example. I get 78mg/hub in my 3.0 tdi, but it's impossible to get ( 78*1,5*6 cyl.)= 702 Nm. I never measured my car on dyno, but i think it has below 600 Nm.

Anti
Silver
 
Posts: 74
Joined: Mon Jan 26, 2015 7:59 pm
Location: Bagdad

Re: Bosch EDC16 REMAP | Torque/Power Calculation

Postby Ionut » Wed Jul 08, 2015 12:23 am

TQ = (IQ * 6 * Cyl. Number) / 4 * correction factor

For 6 cyl. engine the factor starts from 0.9 and folds to 0.8 at high rpm
For any other combination, the factor is from 0.75 at high rpm to 1 below 2250 rpm. To simplify calculations you can use factor 0.9

So, for 78mg on a 4 cyl engine you`ll get ~420Nm or 631 Nm on a 6 cyl engine.

And Power, in BHP can be calculated like (TQ * RPM) / 7121

User avatar
Ionut
Gold
 
Posts: 161
Joined: Tue Feb 19, 2013 9:09 pm
Location: Brasov, Romania

Re: Bosch EDC16 REMAP | Torque/Power Calculation

Postby Lily » Mon Aug 17, 2015 8:06 am

Good!

Lily
New user
 
Posts: 5
Joined: Fri Jul 17, 2015 9:51 am
Location: Italy

Next

Return to Map Factors, Offsets, Units and Calculations

Who is online

Users browsing this forum: No registered users and 1 guest