alfa 159 edc16c39

Help and tips about your tune, post your work in here.

Return to Rate My Tune

alfa 159 edc16c39

Postby piwo_1 » Tue Oct 14, 2014 4:46 pm

hello,
please check my file:

https://www.dropbox.com/s/0xoimgn7duhpp ... a.rar?dl=0

Please bear with us as it the first EDC16

piwo_1
New user
 
Posts: 4
Joined: Sun Aug 17, 2014 11:49 am
Location: Polska

Re: alfa 159 edc16c39

Postby slackwar3 » Thu Oct 16, 2014 1:42 pm

Hi,

Did you test this file in your car? Does it still have DPF?

You have to study a bit more how this ECU works and what values of torque/power you want to achieve, tune is incomplete and has many errors IMO, if you still have DPF you need to be very careful when tuning too.

A few notes:

- Only one DW map changed, there are 4 DW maps
- Torque limiter map changed with values higher than DW, not good
- Be careful with torque values requested in low revs, this could damage your clutch and dual mass flywheel
- Torque conversion map changed, why? You should not change it, only need to change if you want to tune to >500Nm
- Boost request changed for stock values, not good, you should only change last column when it's injecting more than 70mm3/i, best way is to edit axis and set higher IQ and change boost only in that column

Anyway you missed IQ limiters, so it will inject almost same fuel as stock.

Regards

slackwar3
New user
 
Posts: 16
Joined: Wed Sep 03, 2014 6:15 pm
Location: Portugal

Re: alfa 159 edc16c39

Postby jaroslav » Sat Oct 25, 2014 10:20 pm

i have the change map egr and dpf off, i pay for this change 200€, its this correctly work or not, also same alfa
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

jaroslav
New user
 
Posts: 6
Joined: Tue Oct 14, 2014 12:29 am
Location: Slovakia

Re: alfa 159 edc16c39

Postby slackwar3 » Thu Oct 30, 2014 6:13 pm

jaroslav wrote:i have the change map egr and dpf off, i pay for this change 200€, its this correctly work or not, also same alfa


Hi,

Should work, however if you paid for a manual dpf off solution be aware that it was done with volta software, which in my opinion isn't good, it has alot of DTC codes disabled and it changes at least 2 torque limiter maps (in case of failure) which should be left stock.

About egr off it's fine.

Best regards

slackwar3
New user
 
Posts: 16
Joined: Wed Sep 03, 2014 6:15 pm
Location: Portugal


Return to Rate My Tune

Who is online

Users browsing this forum: No registered users and 1 guest