EDC16C3 - show no configuration in PP2000

Posts relating to recovering blocked ECUs

Return to Recovering ECU

EDC16C3 - show no configuration in PP2000

Postby failure » Sat Sep 13, 2014 6:48 pm

Hello to all!
Please if anyone has come across a similar problem to help. I am trying to activate cruise control on my 206 1.4 hdi 2002. I am using PP2000 and to my surprise it turned out that there are no ECU configuration - virgin ecu. Otherwise, there is live data and everything is fine.
My adapter is chinese clone, but I also try with the original one and the result is the same. Someone was touched BSI because VIN numbers was introduced wrong, I changed it again and the same thing - no possible configurations in ECU section.

failure
New user
 
Posts: 7
Joined: Sat Sep 13, 2014 6:24 am
Location: bulgaria

Re: EDC16C3 - show no configuration in PP2000

Postby failure » Tue Sep 16, 2014 9:29 am

I am very sorry, but still cannot read private messages, please send any answers here.

failure
New user
 
Posts: 7
Joined: Sat Sep 13, 2014 6:24 am
Location: bulgaria

Re: EDC16C3 - show no configuration in PP2000

Postby markGonzalez » Wed Sep 17, 2014 6:23 pm

I think you should make the clone of the BSI. And after you will active your cruise control.

markGonzalez
Bronze
 
Posts: 37
Joined: Wed Sep 17, 2014 12:57 pm
Location: Montpellier

Re: EDC16C3 - show no configuration in PP2000

Postby failure » Tue Sep 23, 2014 9:15 am

1.jpg

Sorry but cannot understand your point - CC is active in BSI, no possible to activate anything in ECU.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

failure
New user
 
Posts: 7
Joined: Sat Sep 13, 2014 6:24 am
Location: bulgaria


Return to Recovering ECU

Who is online

Users browsing this forum: No registered users and 1 guest