It is currently Tue Dec 19, 2017 12:24 am

News News of For sale

Site map of For sale » Forum : For sale

Possible ECU Stuff for sale.

new AUDI ECUs

I have some brand new ECUs for VAG (brand new!! naked EEprom)

MED17.5.21
EDC17C64
MED9.1
EDC16U34
Read more : new AUDI ECUs | Views : 5 | Replies : 0


BMW all Benzin DAMOS&A2L

DME8.x (B38 B48 B58) --> incl. APPL
MEVD17.2 N55 (E- /F-Models) --> incl. APPL & Funktionsbeschreibung
MEVD17.2.3 B38/B48 --> incl. APPL
MEVD17.2.4 N20 (E- /F-Models) --> incl. APPL & Funktionsbeschreibung
MEVD17.2.6 N55 BHP (E- /F-Models) --> incl. APPL & Funktionsbeschreibung
MEVD17.2.8 N63 / S63 --> incl. APPL
MEVD17.2.G N55CVO / Alpina and S55 --> incl. APPL & Funktionsbeschreibung
MEVD17.2.S N55 BHDP SWT
MEVD17.2.U N20HCVO --> incl. APPL
MSD80 N43/N54 --> incl. Funktionsbeschreibung
MSD81 N53/N54 --> ...
Read more : BMW all Benzin DAMOS&A2L | Views : 3 | Replies : 0


IMMO Universal Decoding 4.5

Hi, I have for sell latest version IMMO Universal Decoding 4.5

IMMO Universal Decoding is the best software to remove the IMMO code of ECU.
The software IMMO Universal Decoding is compatible with read file with programmer such as UPA-USB, WELLON Series VP/GP, Galep, Serial and many other (not supplied with the software). Once loaded the read file of the ECU, The software will repair the IMMO code. For many ECU, there is the possibility ...
Read more : IMMO Universal Decoding 4.5 | Views : 169 | Replies : 3




NEW ver. 1.32 MTool Mileage Correction via OBD II

Super Mileage Correction MTool ver. 1.32 + Dongle + Denso!

This program (MTool) is designed to correct the mileage on the car.
Mileage programming through the diagnostic connector OBD2 Plug-in OBD , or service connector without disassembling the panel itself.

For operation only needed ELM327 OR FAR BETTER ESL27 Plug-in OBD and M-Bus adapter!

Optional: DENSO Adapter (also support M-BUS)

Carlist MTool version 1.32:

VAZ (MBus) – Read/Write mileage, Read/Write EEPROM, Read FULL, ...
Read more : NEW ver. 1.32 MTool Mileage Correction via OBD II | Views : 152 | Replies : 6


Road Dyno - DYNOMET 4.11

Hey.

I have to sell road dyno DYNOMET. I bougt this dyno 1/2017 as new. Dyno was tested 2 times. I dont need it any more because i already bought roller dyno.

Price 2300 € + Shipping cost

Location : Czech

http://www.dynomet.dk/en_portableroaddyno.htm

https://www.youtube.com/watch?feature=p ... BBP2e2HPMA


dynomet.jpg
Read more : Road Dyno - DYNOMET 4.11 | Views : 93 | Replies : 1


Great deal on kess, ktag, winols

Hello,

For sale is a kess v2 (buyed 2014) a ktag (buyed 2015) and winols lisence.

Kess v2 all protocol unlock + cableset

Ktag all protocol unlock + cable set + adaptor set

Winols lisence full for 2 computer + damos plug in.

Price 6500

Regards
Read more : Great deal on kess, ktag, winols | Views : 193 | Replies : 3


Hybrid Turbochargers and Manifolds from ProfiTurbo.com

Hello Everyone,

I would like to shortly present what ProfiTurbo.com can do for you in terms of hardware for tuning purposes.

1. Hybrid Turbochargers.

For most of the turbos the following mods can be applied:

– reinforced journal bearings – so-called ‘360’
– CNC modification of turbine housing
– CNC modification of compressor housing
– bigger and more efficient Billet Wheels
– bigger and more efficient Turbine Wheels, Clipped & lightened
– reinforced actuators

This ...
Read more : Hybrid Turbochargers and Manifolds from ProfiTurbo.com | Views : 67 | Replies : 0


Deutz SerDia 2010 [2017] full levels

Hi, I have for sale a Software Deutz SerDia 2010 full levels

Deutz SerDia 2010 has a maximum access level up to 6 !!!

Works ONLY with usb Dongle.

Works with any original interface DeCOM.

DeCOM is genuine Deutz dealer interface with support of two CAN, K/L-Line, J1708 protocols. It is

the mostly recommended interface for o CAN, K/L-Line, J1708 protocols. It is the mostly recommended

interface for SerDia 2010 to work on ...
Read more : Deutz SerDia 2010 [2017] full levels | Views : 158 | Replies : 0


NEW ver. 1.32 SUPER Mileage Correction MTool via OBD II

Super Mileage Correction MTool ver. 1.32 + Dongle + Denso!

This program (MTool) is designed to correct the mileage on the car.
Mileage programming through the diagnostic connector OBD2 Plug-in OBD , or service connector without disassembling the panel itself.

For operation only needed ELM327 OR FAR BETTER ESL27 Plug-in OBD and M-Bus adapter!

Optional: DENSO Adapter (also support M-BUS)


Carlist MTool version 1.32:

VAZ (MBus) – Read/Write mileage, Read/Write EEPROM, Read FULL, ...
Read more : NEW ver. 1.32 SUPER Mileage Correction MTool via OBD II | Views : 273 | Replies : 0


 

Login  •  Register


Statistics

Total posts 54695 • Total topics 16530 • Total members 14962