Winols Damos and Mappack Training

Software used for ECU editing

Winols Damos and Mappack Training

Postby eisenhower » Mon Feb 03, 2014 4:28 pm

hi guys ,
dont flame me cause im new at ECU .
i want to ask some question according to ECU software :
1.how to know the ecu map is error and how to see that in Winols ?
2.how to use damos ?
3.what is the software to make the map of ecu become normal again ?

thanks guys,
eisenhower

eisenhower
New user
 
Posts: 11
Joined: Tue Dec 17, 2013 2:47 am
Location: Indonesia

Re: Winols Damos and Mappack Training

Postby JPower » Mon Feb 03, 2014 8:41 pm

Hi,

I am not sure if I understood you correctly but I will try :)

1) With the software you use, e.g. WinOLS, you can see checksum errors if there are any. And if there are any errors within the maps (bad remapping) you will see that while driving the car if you will be able to start the engine. If you would like to knwo about general errors you need to do diagnosis ...

2) Usually no private person has damos but if you have one :mrgreen: just load it into your software and use the information shown on the left side ...

3) That would be the same software which you used to make it abnormal. But usually you should have original read of your ecu so you can use that

User avatar
JPower
New user
 
Posts: 20
Joined: Sat Oct 12, 2013 6:39 pm
Location: EU

Re: Winols Damos and Mappack Training

Postby dmitriy1200 » Thu Feb 13, 2014 2:30 pm

where to get damos?

dmitriy1200
New user
 
Posts: 3
Joined: Fri Jan 24, 2014 10:27 am
Location: russia

Re: Winols Damos and Mappack Training

Postby nio » Mon Feb 17, 2014 11:46 pm

I have damos. If anyone is interested can contact me. BR.

User avatar
nio
Bronze
 
Posts: 39
Joined: Wed Aug 21, 2013 11:27 pm

Re: Winols Damos and Mappack Training

Postby zok » Tue Feb 18, 2014 8:43 am

Do you have damos for mondeo 2.0 TDCi 130 cv 2004 with delphi MPC555?

zok
Diamond
 
Posts: 318
Joined: Sun May 05, 2013 9:29 pm
Location: Slovenia

Re: Winols Damos and Mappack Training

Postby leonevich » Thu Feb 20, 2014 12:05 pm

Do you have damos for peugeot 607 2.2 HDi 2000 with Bosch EDC15C?

leonevich
New user
 
Posts: 21
Joined: Tue Feb 18, 2014 5:33 pm
Location: Belarus

Re: Winols Damos and Mappack Training

Postby fabioefra44 » Tue Mar 04, 2014 11:02 am

All damos available to date, if administrators allow, are available for sale

fabioefra44
New user
 
Posts: 1
Joined: Fri Apr 12, 2013 10:43 am
Location: taranto

Re: Winols Damos and Mappack Training

Postby SnobordBum » Sat Apr 05, 2014 10:10 pm

Many damos and *.a2l files can be found using Google. There are many tuning forums out there...

SnobordBum
New user
 
Posts: 3
Joined: Sat Nov 09, 2013 6:37 am
Location: Somewhere

Re: Winols Damos and Mappack Training

Postby masterbruce » Sat Apr 12, 2014 4:34 pm

hi

I had training from redline automotive and they supply also after production damos/a2l. Very good and fast service.

www.redlineautomotiveconsulting.com

masterbruce
New user
 
Posts: 4
Joined: Sat Mar 29, 2014 6:04 pm
Location: everywhere

Re: Winols Damos and Mappack Training

Postby fodortms » Tue Apr 22, 2014 6:38 pm

Hi
Link are dead!!

fodortms
Silver
 
Posts: 65
Joined: Wed Oct 24, 2012 3:02 pm
Location: Hungary

Next

Return to ECU Tuning Software

Who is online

Users browsing this forum: No registered users and 0 guests