Hello,

This is a Seat Ibiza 1.4 TDI 75hp. The goal is to slightly increase the power without getting the most out of the car.

Driver Wish - Here I even slightly lowered the values, as it seemed very aggressive to me. I looked at another such stock file, it had the same extreme values.
https://prikachi.net/images/2025/04/10/Driver-Wish.png

Torque Limiter - I increased the values to 57mg.
https://prikachi.net/images/2025/04/10/Torque-limiter.png

Smoke Limiter - We increased the values to 57mg.
https://prikachi.net/images/2025/04/10/Smoke-Limiter.png

IQ by MAP - I changed the last values on the X axis, by increasing the milligrams in the map.
https://prikachi.net/images/2025/04/10/IQ-by-MAP.png

IQ by MAF - I haven't changed anything, the default is 60mg.
https://prikachi.net/images/2025/04/10/IQ-by-MAF.png

Target boost - I changed the last 2 columns on the X axis, by changing the last one to 60mg and increasing the pressure to 2230mbar, which is about 1.23 bar relative.
https://prikachi.net/images/2025/04/10/Boost-target.png

Boost limiter - Based on calculations from Excel, I changed the pressure limiter.
https://prikachi.net/images/2025/04/10/Boost-limit.png

N75 - I haven't changed anything, since the stock one has 60 mg set.
https://prikachi.net/images/2025/04/10/N75.png

EGR - I turned it off.
https://prikachi.net/images/2025/04/10/EGR.png

SOI - Here I added 60 mg on the X axis, and I also changed the injection degrees. They are calculated again in Excel. Here I am worried whether the calculations are actually correct, I would be grateful for an opinion. SOI above 0 degrees and those below zero have different values, since the maps were different.
https://prikachi.net/images/2025/04/10/SOI.png
https://prikachi.net/images/2025/04/10/SOI--5c.png

DOI - Here I added 60 mg on the Y axis, and I also changed the values in the maps. I haven't touched DOI 04 because the stock one has 65 mg of fuel in it and DOI 05 because I'm not sure if I should change it, since it is a small map and has values up to 30 mg maximum. I would be grateful again for your opinion about the calculations and whether I should change DOI 05.
https://prikachi.net/images/2025/04/10/DOI.png
https://prikachi.net/images/2025/04/10/DOI-01.png
https://prikachi.net/images/2025/04/10/DOI-02.png
https://prikachi.net/images/2025/04/10/DOI-03.png
https://prikachi.net/images/2025/04/10/DOI-04.png
https://prikachi.net/images/2025/04/10/DOI-05.png


I am attaching photos as links under each map, as well as attaching the original and modified file.
I would be grateful for your criticisms and opinions.