Hello guys, I can’t keep the boost after 4000 rpm, I know this can be affected by EGT, but the log file contains completely adequate calculated data. Has anyone encountered this? And he will point you in the right direction. thanks in advance.
Hi I'm starting my adventure with chip tuning, and I have just modified the map for my car. Could someone check if it is done correctly and if it is safe?
My tuned file Ver 3.0 Done in Tuner Pro...XDF attached... Hope to get some opinions. Diagnostic limits for boost should be raised to 4080mbar and IQ100 for injection. Should be around 160HP. IQ=65mg N75 and Smoke by MAP will need more work I believe Please rate and share thoughts!!! Manny thanks!
1.9 BKC GT1749VB Decat DP PD150 headbolts EGR delete S3 alloy IC and piping 4BAR MAP VALEO SMF
can someone take a look at my stage1 tune if is any good and see if checksum needs to be corrected or something else? I got it from a friend (didnt pay for it) and dont know if it is safe to upload it car.
Car is Fiat Stilo 1.9JTD 59kw Bosch EDC15C7, scaned with Galletto 1260
Hi, after so many years, a second attempt was succesful. Files in attachment, VAGEDC comparision files. PS. the tuning, adjustment was done with WINOLS 2.24, Bin files read and write with mpps v 16 1.0.2 , China clone. Please rate.
Hello, can someone respectfully comment on this stage 1, I do not have the car with me, it is only for educational purposes. ORI, MOD AND KP in attachment. Regards