Hello, this file tune awx engine. DW, Torque Smoke calculation AFR, Boost map, limiter, svbl, duration and soi calculation to high IQ. Please rate.

quuuun wrote:Hello, this file tune awx engine. DW, Torque Smoke calculation AFR, Boost map, limiter, svbl, duration and soi calculation to high IQ. Please rate.

My review:
Boost req and limiter looks fine. limiter you can actually tune the whole map and not only just part of it.
Boost by temp you can also extend.
DW, looks fine if you looking for more low down response.
Duration looks good and done the correct way.
Look at your fuel volume correction, as you missed that
IQ by MAF good.
SL by MAF i wouldnt tune on the lower Air flow rates, as you are basically enriching AFR in this region which could have an effect on economy.
SL by MAP you missed
SOI, be carefull with this. cant say whether right or wrong, as each guy has their own method of doing it, and there are always various results, but in my opinion, i would have just left it stock for this tune, you changed it for all the temperature variations and your SOI maps has higher values than your SOI limiter
TL, also look fine.

NRT wrote:

quuuun wrote:Hello, this file tune awx engine. DW, Torque Smoke calculation AFR, Boost map, limiter, svbl, duration and soi calculation to high IQ. Please rate.

My review:
Boost req and limiter looks fine. limiter you can actually tune the whole map and not only just part of it.
Boost by temp you can also extend.
DW, looks fine if you looking for more low down response.
Duration looks good and done the correct way.
Look at your fuel volume correction, as you missed that
IQ by MAF good.
SL by MAF i wouldnt tune on the lower Air flow rates, as you are basically enriching AFR in this region which could have an effect on economy.
SL by MAP you missed
SOI, be carefull with this. cant say whether right or wrong, as each guy has their own method of doing it, and there are always various results, but in my opinion, i would have just left it stock for this tune, you changed it for all the temperature variations and your SOI maps has higher values than your SOI limiter
TL, also look fine.

Thank you for your opinion. From what air flow do you suggest a change smoke map?
I wonder if it would be better to change the last column SOI map, adapting to only higher IQ.
Here I changed slightly from 45 mg up. I noticed SOI limiter. Get I 160hp? I have not extended duration 0 (only 60mg), and duration 4,5, because I look this don't use.