R53 cooper S lambda off, is Galletto safe?

Posts related to map selection, map location, correct map treatment.

Re: R53 cooper S lambda off, is Galletto safe?

Postby ledsandwich » Sat Jan 02, 2016 5:16 pm

Hi Has anyone got any further with this, i have a JCW 210 file downloaded but am struggling to find the maps using auto search in win ols, does it have to be completed manually or do i need a DAMOS file?

ledsandwich
New user
 
Posts: 3
Joined: Sat Jan 02, 2016 4:44 pm
Location: united kingdom

Re: R53 cooper S lambda off, is Galletto safe?

Postby Wod » Sun Feb 14, 2016 8:33 pm

ledsandwich wrote:Hi Has anyone got any further with this, i have a JCW 210 file downloaded but am struggling to find the maps using auto search in win ols, does it have to be completed manually or do i need a DAMOS file?


Hello mate, I have only just got around to reading my own Flash file. However as mentioned by Adrian user said its a sort of rolling code?
NCS Expert/ Dummy or something similar is whats needed apprantly. For that youl need a INPA bmw cable, i hear that also vw kkl cable will work aswell as galletto 1260. However you may aswell make purchase of proper inpa type as it will come with software which is hard to find and download over the internet due to its massive size.

I think NCS expert is another language though?

Wod
Gold
 
Posts: 109
Joined: Tue Aug 26, 2014 6:13 pm
Location: Derby,UK

Re: R53 cooper S lambda off, is Galletto safe?

Postby Wod » Sun Mar 06, 2016 4:16 pm

adriancl wrote:Hi mate,
Gallleto cheap cable can do the job, no danger,is 100% safe for Siemens EMS2000 ECU.
About second Lambda sensor of, can't do that in winols, only with NCS Expert sw(because is something as a rolling code,switch don't have a fixed address, can't explain more with my poor english)
Don't play to much with R53 sw, because is gasoline supercharged engine, if you run lean, can melt pistons.
Only copy the JCW throttle map is not enough, as you know, JCW have bigger injectors-380cc-, reduced SC pulley,and also other hw mods.In fact, this "Throttle map" is misname, the right name is "Torque Limiter for manual or automatic transmission"-, and determines the driver requested torque based on the accelerator pedal angle and engine speed.
This is codding address for second Lambda off with NCS Expert.


Hello Adrian, I have coded only bc1 module so far.
My guess is that I have to read the DME through NCS or is this katalyst options in another module?
Thanks

Wod
Gold
 
Posts: 109
Joined: Tue Aug 26, 2014 6:13 pm
Location: Derby,UK

Re: R53 cooper S lambda off, is Galletto safe?

Postby Wod » Sun Mar 06, 2016 4:30 pm

Also, in EMS module,
There are four options
EU3 EU4 JAPAN or LEV
Can somebody clarify what the regs are in these sitatuions?
I was thinking of changing to japan mode?
Thanks

Wod
Gold
 
Posts: 109
Joined: Tue Aug 26, 2014 6:13 pm
Location: Derby,UK

Re: R53 cooper S lambda off, is Galletto safe?

Postby Kisu1337 » Tue Nov 21, 2017 2:42 am

adriancl wrote:This is codding address for second Lambda off with NCS Expert.

How to find this Post Cat Address and what to do with it ? Your image looks like in Ida debugger, i don't have one atm, Can i use HxD and WinOLS for crc checksum fix ? :)

Kisu1337
New user
 
Posts: 14
Joined: Tue Nov 21, 2017 2:16 am
Location: Poland

Re: R53 cooper S lambda off, is Galletto safe?

Postby Wod » Thu Nov 23, 2017 3:44 pm

Kisu1337 wrote:
adriancl wrote:This is codding address for second Lambda off with NCS Expert.

How to find this Post Cat Address and what to do with it ? Your image looks like in Ida debugger, i don't have one atm, Can i use HxD and WinOLS for crc checksum fix ? :)


Have found an option which should work, if you look at the codes for options there is one which you can add called (Katalyst removal for leaded fuel), this should work by changing the ZCS system

Wod
Gold
 
Posts: 109
Joined: Tue Aug 26, 2014 6:13 pm
Location: Derby,UK

Re: R53 cooper S lambda off, is Galletto safe?

Postby Wod » Thu Nov 23, 2017 3:50 pm

Here is the code
received_10159623941125597.png
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Wod
Gold
 
Posts: 109
Joined: Tue Aug 26, 2014 6:13 pm
Location: Derby,UK

Previous

Return to Map Location and Addresses

Who is online

Users browsing this forum: No registered users and 1 guest