problem with pug 407 1.6hdi dpf off

by **bradley** » Mon Feb 06, 2017 9:07 pm

wonder if any one can shed some light on this........

reading and writing with mpps

read the file, put it through ecu safe....... everything went fine car did about 100 miles and now cuts out when you full throttle for about 3 seconds, come to a complete stop turn it off and back on and its fine but with weird power delivery, until you full throttle then it happens again.

figured it might be ecu safe (read on here that it isn't that good)

so put it through volta........ now I've got a 3000RPM limit???????

haven't had a chance to drive it yet but i was hoping someone who knows could help

it's a BOSCH EDC16C34

thanks in advance

by **bradley** » Mon Feb 06, 2017 9:09 pm

i cant upload the remove files i have done, it wont let me :crazy:

by **Mihov111** » Mon Feb 06, 2017 10:25 pm

ECUSAFE is not good for this ecu you need to do it manually

by **szantis** » Mon Feb 06, 2017 11:02 pm

Hi, try this. Manually solution.

by **bradley** » Mon Feb 06, 2017 11:04 pm

szantis wrote:Hi, try this. Manually solution.

thanks!!! life saver
do I just write that the same way I normally would?

by **szantis** » Mon Feb 06, 2017 11:08 pm

Yes , only DPF switch is changed :) Volta and Ecu Safe modified many places in software. In this case only 2 bits was....Try and report 8-)

by **steich** » Tue Feb 07, 2017 9:26 am

If you still need from FULL FAP OFF and additive off, contact with us by PM.

BR

by **bradley** » Tue Feb 07, 2017 1:30 pm

szantis wrote:Yes , only DPF switch is changed :) Volta and Ecu Safe modified many places in software. In this case only 2 bits was....Try and report 8-)

dropped that file in.... still got 3000RPM limit but now have a code of

p1600 injector configuration fault

tried coding the injectors but it wont let me??? any ideas?

by **Houdini** » Tue Feb 07, 2017 2:15 pm

bradley wrote:
szantis wrote:Yes , only DPF switch is changed :) Volta and Ecu Safe modified many places in software. In this case only 2 bits was....Try and report 8-)

dropped that file in.... still got 3000RPM limit but now have a code of

p1600 injector configuration fault

tried coding the injectors but it wont let me??? any ideas?

what tool are you using to flash the file?

by **bradley** » Tue Feb 07, 2017 2:29 pm

Houdini wrote:
bradley wrote:
szantis wrote:Yes , only DPF switch is changed :) Volta and Ecu Safe modified many places in software. In this case only 2 bits was....Try and report 8-)

dropped that file in.... still got 3000RPM limit but now have a code of

p1600 injector configuration fault

tried coding the injectors but it wont let me??? any ideas?

what tool are you using to flash the file?

mpps