"translate" this please

Here you can post / find ECU expressions.

"translate" this please

Postby Fuse » Tue Apr 24, 2012 11:49 pm

Per example, the map of the edc15c2, a little translation and perhaps the units would be nice... ;)

SVRPL=?
N75
N75 2
N75 3
SVBL

Fuse
Bronze
 
Posts: 27
Joined: Wed Apr 18, 2012 11:15 pm
Location: Portugal

Re: "translate" this please

Postby RPM freak » Wed Apr 25, 2012 12:00 am

SVRPL - Single Value Rail Pressure Limiter = Max aloved pressure in the rail. The rail pressure will never be higher then that value.

N75 - It is generic name of a map for elctronic valve duty cycle that controls the vanes of the turbo
N75 2 - the second one
N75 3 - the third one
There are more then one N75 maps. They are chosen by the ECU in diferent conditions.

SVBL - Single Value Boost Limiter = Max boost that is aloved in the system. The boost will never be higher then that value.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: "translate" this please

Postby Fuse » Wed Apr 25, 2012 12:08 am

Is this Single Value the one that makes the car enter on so called safe-mode our in some cases, cut-off the engine even if driving? (my did that with box on the rail pressure)

Fuse
Bronze
 
Posts: 27
Joined: Wed Apr 18, 2012 11:15 pm
Location: Portugal

Re: "translate" this please

Postby RPM freak » Wed Apr 25, 2012 12:16 am

Correct.
Tuning boxes interupt the signal between the ECU and the sensors. They alter the signal (lower or rise) and send it to the ECU. The ecu thinks that there is not enough pressure in the rail and closes the rail pressure valve to compensate. When you have higher pressure and same injetion time you can inject more fuel = more power. Fooling the ecu this way is not a good thing to do.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: "translate" this please

Postby Fuse » Wed Apr 25, 2012 12:36 am

RPM freak wrote:Correct.
Tuning boxes interupt the signal between the ECU and the sensors. They alter the signal (lower or rise) and send it to the ECU. The ecu thinks that there is not enough pressure in the rail and closes the rail pressure valve to compensate. When you have higher pressure and same injetion time you can inject more fuel = more power. Fooling the ecu this way is not a good thing to do.


Thats why i want to learn how to remap ;)

Fuse
Bronze
 
Posts: 27
Joined: Wed Apr 18, 2012 11:15 pm
Location: Portugal

Re: "translate" this please

Postby OdinEidolon » Wed Apr 25, 2012 4:42 pm

Fuse wrote:Is this Single Value the one that makes the car enter on so called safe-mode our in some cases, cut-off the engine even if driving? (my did that with box on the rail pressure)


In English the "safe mode" is also called "limp mode", it may help you in the future if you are looking for how to solve a limp mode problem. ;) ;)

OdinEidolon
Site Admin
 
Posts: 362
Joined: Wed Mar 28, 2012 10:41 am

Re: "translate" this please

Postby Fuse » Wed Apr 25, 2012 7:21 pm

OdinEidolon wrote:
Fuse wrote:Is this Single Value the one that makes the car enter on so called safe-mode our in some cases, cut-off the engine even if driving? (my did that with box on the rail pressure)


In English the "safe mode" is also called "limp mode", it may help you in the future if you are looking for how to solve a limp mode problem. ;) ;)


Limp is not the same that safe-mode, many PSA's cut-off the engine when some value are achevied... (been there, done that ;) )

I have a few obd scanner, amoung then the Diagbox.

Fuse
Bronze
 
Posts: 27
Joined: Wed Apr 18, 2012 11:15 pm
Location: Portugal

Re: "translate" this please

Postby OdinEidolon » Wed Apr 25, 2012 7:39 pm

Fuse wrote:
OdinEidolon wrote:
Fuse wrote:Is this Single Value the one that makes the car enter on so called safe-mode our in some cases, cut-off the engine even if driving? (my did that with box on the rail pressure)


In English the "safe mode" is also called "limp mode", it may help you in the future if you are looking for how to solve a limp mode problem. ;) ;)


Limp is not the same that safe-mode, many PSA's cut-off the engine when some value are achevied... (been there, done that ;) )

I have a few obd scanner, amoung then the Diagbox.


Oh sorry then! :roll:
what is the exact difference? Limping is when the engine power and revs are cut drastically, safe mode is when the engine is shut down because of some problems?

OdinEidolon
Site Admin
 
Posts: 362
Joined: Wed Mar 28, 2012 10:41 am

Re: "translate" this please

Postby skywallker » Wed Apr 25, 2012 11:04 pm

is it possible to make safe mod in fact tuned mod?this way it would be possible to switch to tuned mode(safe mode) during driving with just one switch(power for maf example) :D

skywallker
Bronze
 
Posts: 32
Joined: Wed Apr 25, 2012 10:10 pm
Location: serbia

Re: "translate" this please

Postby Fuse » Thu Apr 26, 2012 12:22 am

In English the "safe mode" is also called "limp mode", it may help you in the future if you are looking for how to solve a limp mode problem. ;) ;)[/quote]

Limp is not the same that safe-mode, many PSA's cut-off the engine when some value are achevied... (been there, done that ;) )

I have a few obd scanner, amoung then the Diagbox.[/quote]

Oh sorry then! :roll:
what is the exact difference? Limping is when the engine power and revs are cut drastically, safe mode is when the engine is shut down because of some problems?[/quote]

According to my experience, yes, its quite that.

Never happened with your engine? I only eard this engine off situation on PSA's, but i talk more with persons who drive PSA's ;)

Fuse
Bronze
 
Posts: 27
Joined: Wed Apr 18, 2012 11:15 pm
Location: Portugal

Next

Return to Dictionary

Who is online

Users browsing this forum: No registered users and 0 guests