PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Tools used for ECU reading and writing

PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby saxsss » Fri Mar 18, 2016 10:43 am

It can be safely* used to flash the ECU. Siemens PCR2.1 UNLOCK adapter TRICORE supports FGtech Galletto and KTAG. Precisly designed adapter for safe handlig that minimises the risk while connecting.

ATTENTION!
We offer 2 different dimensions of the adapter, L(large, 6cm wide) and S(small, 4cm wide). When buying please be carefull to choose the right one.

No more tuning only over OBD, start real business and cover much more vehicles faster.
With BDM adapter you can make full backup of the ECU in case that something goes wrong and you can than use that backup.

Technical specification
- supports Fgtech and KTAG programmer with switching mode with jumpers
- supports stable and precise connection - with 2.5mm PCB there is no bending
- supports stable and reliable connection with precise golden pogopins
- very good impact resistance and nice handling with smooth PCB rounded edges
- usefull marking on the PCB
- ground and +12V pins are marked for led lights
- external 12 V power supply can be used for LEDs
- 4 LEDs for very good luminosity
- very important cut out edges very close around the pinouts for great view while connecting to the ECU
- clear view of the ECU pads simplifies positioning of the adapter- adapter dimension:60mm/40mm x 60mm x 2.5mm
- adapter color: green with white print

More details at: http://www.ecubay.com/
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

User avatar
saxsss
Bronze
 
Posts: 34
Joined: Sat Mar 31, 2012 2:33 pm
Location: savinjska, slovenia

Re: PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby MDP » Wed Jun 01, 2016 1:42 pm

i bought one. works great

User avatar
MDP
Bronze
 
Posts: 37
Joined: Fri Apr 08, 2016 7:49 am
Location: South Africa

Re: PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby petbeemer » Mon Sep 19, 2016 6:57 pm

my next purchase, whats the difference between the alientech one?

petbeemer
New user
 
Posts: 16
Joined: Mon Feb 11, 2013 1:36 pm
Location: Derbyshire UK

Re: PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby ecuedit » Tue Sep 20, 2016 2:19 pm

petbeemer wrote:my next purchase, whats the difference between the alientech one?

this one supports more programmers.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby kernel32 » Thu Oct 06, 2016 5:38 am

going to buy for sure in the future!

kernel32
New user
 
Posts: 19
Joined: Thu Mar 19, 2015 2:05 pm
Location: greece

Re: PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby Alfano » Sat Oct 21, 2017 6:01 pm

Hi, do you now type adapter for an Abarth 595 Comp, 2016 model european 1,4 T.jet model?

Alfano
New user
 
Posts: 4
Joined: Sat Oct 21, 2017 5:56 pm
Location: Norway

Re: PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby Alfano » Sun Oct 22, 2017 10:26 am

Hi, we are close to buy ALIENTECH POSITIONING FRAME EVO WITH ILLUMINATION, but are looking on Tricore BDM Frame, can some 1 tell me the different?

And on Alientech i think it is: K-TAG POSITIONING FRAME ADAPTER FOR MOTOROLA MPC56XXX ECU MARELLI
Can someone on ecubay.com help me here to tell the type for an: POSITIONING FRAME ADAPTER FOR An Abarty 595 Comp, 2016, T-jet european model?

Thank you.
Regards
Ole Henrik
Norway

Alfano
New user
 
Posts: 4
Joined: Sat Oct 21, 2017 5:56 pm
Location: Norway

Re: PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby ecuedit » Mon Oct 23, 2017 12:31 pm

hello,
our frame is made from first grade aluminium and it is covered with anodized material, that is non conductive.
alsou ergonomy of our frame is one of a kind. Frame is much bigger than all other frames so you can put any ecu on it,
also any truck ecu which is normally much bigger/larger. Compared to other frames, this frame is PRO frame with first grade materials and very advanced ergonomy/shape. Also it can move to any direction - it is flexible.
you can use any KTAG adapters with our frame as it is standard adapter holder size.

hope i answered your question,
if not please contact directly for more details.

regards

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby C2H5OH » Thu Mar 29, 2018 1:06 am

Sorry for bringing up an old thread, but I need a BDM frame but wont use it all the time, whats a good frame with adapters that's reasonably priced?

C2H5OH
New user
 
Posts: 8
Joined: Thu Mar 29, 2018 12:39 am
Location: United States

Re: PCR2.1 Unlock Adapter Supports KTAG and FGTECH

Postby Tune4Fun » Thu May 23, 2019 3:03 pm

I have bought this from ecubay.com and tested. It matched COMPLETLY and did the job right away :D

Tune4Fun
Silver
 
Posts: 69
Joined: Sat Apr 20, 2019 3:55 am
Location: Scandinavia

Next

Return to ECU Tuning Hardware

Who is online

Users browsing this forum: No registered users and 1 guest