opel immo pin from display

How to remove immo and key adaptation

opel immo pin from display

Postby wdariusw » Tue Jun 27, 2017 1:52 pm

Hello. How can i get opel PIN code from CID or GID eeprom dump ? Need software, or there is a way to view code straight from dump ?

wdariusw
Silver
 
Posts: 52
Joined: Wed Feb 03, 2016 2:29 pm
Location: Lietuva

Re: opel immo pin from display

Postby Shooting » Tue Jun 27, 2017 2:22 pm

wdariusw wrote:Hello. How can i get opel PIN code from CID or GID eeprom dump ? Need software, or there is a way to view code straight from dump ?


Post your dump and I'll give you your code

wbr

User avatar
Shooting
Diamond
 
Posts: 1562
Joined: Thu Jan 12, 2017 11:43 am
Location: North Wales

Re: opel immo pin from display

Postby wdariusw » Wed Jun 28, 2017 7:38 am

I changed opel GID into CID, so i want to know pin codes from both screens. Here is dump from CID.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

wdariusw
Silver
 
Posts: 52
Joined: Wed Feb 03, 2016 2:29 pm
Location: Lietuva

Re: opel immo pin from display

Postby wdariusw » Wed Jun 28, 2017 9:15 am

wdariusw wrote:I changed opel GID into CID, so i want to know pin codes from both screens. Here is dump from CID.


I tried to find PIN in my dump. Please verify, code is 4020 ?

wdariusw
Silver
 
Posts: 52
Joined: Wed Feb 03, 2016 2:29 pm
Location: Lietuva

Re: opel immo pin from display

Postby Shooting » Wed Jun 28, 2017 9:16 am

wdariusw wrote:I changed opel GID into CID, so i want to know pin codes from both screens. Here is dump from CID.


Your PIN is 4020

wbr

User avatar
Shooting
Diamond
 
Posts: 1562
Joined: Thu Jan 12, 2017 11:43 am
Location: North Wales

Re: opel immo pin from display

Postby wdariusw » Sat Jul 01, 2017 1:13 pm

Ok. And this is my old CID that i changed into GID. It have 93c56A inside. Please PIN.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

wdariusw
Silver
 
Posts: 52
Joined: Wed Feb 03, 2016 2:29 pm
Location: Lietuva

Re: opel immo pin from display

Postby Shooting » Sat Jul 01, 2017 3:44 pm

wdariusw wrote:Ok. And this is my old CID that i changed into GID. It have 93c56A inside. Please PIN.


Your Pin is 4745

wbr

User avatar
Shooting
Diamond
 
Posts: 1562
Joined: Thu Jan 12, 2017 11:43 am
Location: North Wales

Re: opel immo pin from display

Postby wdariusw » Mon Jul 03, 2017 9:04 am

Yesterday i tried to make spare key for my opel using opcom. Prepared key using zedbull for vectra c 3 button. After programming to the car result is - key can start car, but central locking do not work. As i know central locking should work immediately after new key programming. Opcom first shown "Programming failed", but after second shown "Successfully programmed" . What i did wrong ? Wrong key preparation (but I think key was well prepared) , opcom fault or another problem ?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

wdariusw
Silver
 
Posts: 52
Joined: Wed Feb 03, 2016 2:29 pm
Location: Lietuva

Re: opel immo pin from display

Postby Shooting » Mon Jul 03, 2017 10:21 am

wdariusw wrote:Yesterday i tried to make spare key for my opel using opcom. Prepared key using zedbull for vectra c 3 button. After programming to the car result is - key can start car, but central locking do not work. As i know central locking should work immediately after new key programming. Opcom first shown "Programming failed", but after second shown "Successfully programmed" . What i did wrong ? Wrong key preparation (but I think key was well prepared) , opcom fault or another problem ?


It may not have seen the key first try, I've never seen this fail but if it says it's ok then try it

wbr

User avatar
Shooting
Diamond
 
Posts: 1562
Joined: Thu Jan 12, 2017 11:43 am
Location: North Wales

Re: opel immo pin from display

Postby wdariusw » Mon Jul 03, 2017 10:26 am

Shooting wrote:
wdariusw wrote:Yesterday i tried to make spare key for my opel using opcom. Prepared key using zedbull for vectra c 3 button. After programming to the car result is - key can start car, but central locking do not work. As i know central locking should work immediately after new key programming. Opcom first shown "Programming failed", but after second shown "Successfully programmed" . What i did wrong ? Wrong key preparation (but I think key was well prepared) , opcom fault or another problem ?


It may not have seen the key first try, I've never seen this fail but if it says it's ok then try it

wbr



It says ok, but isn't. Remote do not work, but immo works. I tried two times, now i have two keys only with immo function..

wdariusw
Silver
 
Posts: 52
Joined: Wed Feb 03, 2016 2:29 pm
Location: Lietuva

Next

Return to Immo and Keys

Who is online

Users browsing this forum: No registered users and 1 guest