News of Rate My Tune

Hi all! I just bought this remap files for my focus mk2 1.6 tdci 109hp.Can someone tell if they are good and safe to use?Thanks.

Hello guys, I can’t keep the boost after 4000 rpm, I know this can be affected by EGT, but the log file contains completely adequate calculated data.
Has anyone encountered this?
And he will point you in the right direction.
thanks in advance.

Hi i bought this Tune and i would like to hear what some of you Think about it.

Original File and Tuned File are Attached

Hi I'm starting my adventure with chip tuning, and I have just modified the map for my car. Could someone check if it is done correctly and if it is safe?

Hi Gents,

My tuned file Ver 3.0
Done in Tuner Pro...XDF attached... Hope to get some opinions.
Diagnostic limits for boost should be raised to 4080mbar and IQ100 for injection.
Should be around 160HP. IQ=65mg
N75 and Smoke by MAP will need more work I believe
Please rate and share thoughts!!!
Manny thanks!

1.9 BKC
GT1749VB
Decat DP
PD150 headbolts
EGR delete
S3 alloy IC and piping
4BAR MAP
VALEO SMF

A3 BKC ...

Read more : A3 8P 1.9TDI BKC EDC16U1, GT1749VB | Views : 143 | Replies : 4

Hi,

can someone take a look at my stage1 tune if is any good and see if checksum needs to be corrected or something else? I got it from a friend (didnt pay for it) and dont know if it is safe to upload it car.

Car is Fiat Stilo 1.9JTD 59kw Bosch EDC15C7, scaned with Galletto 1260

Thnx

Hello everyone,

first attempt of EDC16 PD-Engine.
What do you think of this? Smoke-Limit by lambda target is new for me.

wbr

Hi,
after so many years, a second attempt was succesful.
Files in attachment, VAGEDC comparision files.
PS. the tuning, adjustment was done with WINOLS 2.24, Bin files read and write with mpps v 16 1.0.2 , China clone.
Please rate.

Regards, Cristian , Germany

Hello, can someone respectfully comment on this stage 1, I do not have the car with me, it is only for educational purposes.
ORI, MOD AND KP in attachment.
Regards

Hi so found my file was stock have found a DAMOS for this ECU and had a go at it have had to use DAMOS from A3 8P as I cant find one for this exact ECU HW ID 03G906021MP

Anyway Please rate was aiming for a mild stage 1 around 180ps

Dont flame too much I am used to BMW EDC16 / 17