It is currently Thu Mar 28, 2024 12:57 pm

News News of Fine Tuning, Testing, Diagnostics and Analysis

Site map of Fine Tuning, Testing, Diagnostics and Analysis » Forum : Fine Tuning, Testing, Diagnostics and Analysis

Help and tips about fine tuning. Post your questions or how to in here.

Few questions about tuning 1.5dci

Hello guys, I have few questions about 1.5dci 110hp/240nm it's incredibly economical but would like to get a bit more power out of it.
Most Stage 1 tunes promise around 130hp/300nm. Does someone know what is done to achive that? I heard small injectors are limiting factor on those engines. I took a look at some stats in Torque. Under WOT I saw 1600bar fuel pressure and achived 47mg/cp of flow. What would be values ...
Read more : Few questions about tuning 1.5dci | Views : 356 | Replies : 0


EDC17CP14 help injecting more fuel

CAN ANYBODY CHECK PLS WHY I AM LIMITED T0 70MG CAUSE I REQUESTED 76MG ... DO I NEED TO CHANGE AXIS

AND THIS ECU HAS 4 MAPS IQ-TO-NM CONVERSION 2 OF THEM ARE FOR REGENERATION AND I DID NOT TOUCH THEM CAUSE MOST OF PEOPLE DO NOT TOUCH THEM IS THIS WHY I AM LIMITED TO 70MG ... I DID LOGS
Read more : EDC17CP14 help injecting more fuel | Views : 486 | Replies : 5


Help Hardcut BMW E60 530DA 2004 M57 218HP

Greetings,

Already have my M57 tuned but the car has no hardcut (or apparently not well tuned on). Could someone take a quick look at the file and tell me how add a hardcut on it or maybe do a quick (freebie) hardcut for it?

It measured 289hp and 620nm on dyno
Read more : Help Hardcut BMW E60 530DA 2004 M57 218HP | Views : 259 | Replies : 0


Honda Accord 2.2 ictdi, 2006

Hello pals,

Straight to the case:

Currently running stage 3 on my car.
Modifications: Hybrid turbo, FMIC, ceramic clutch, free flow 2.5' exhaust.

Turbo maker says to achieve 220-240 ps i need to boost turbo to 1.65-1.7 BAR.

Chiptuning company where i have my car mapped said that turbo wasnt responding on the pressure request. After they overboosted turbo, it started to push over default, which is 1 BAR. They reached 1.45 BAR and then ...
Read more : Honda Accord 2.2 ictdi, 2006 | Views : 197 | Replies : 1


golf 5 1.9tdi boost problem

hi,

can someone check logs and tell me why i have overboost from 2-3k rpm and underboost after 3k rpm.
I have soft stage 1 260nm 118hp (oem 210nm 90hp) with untouched boost maps (there was no need to raise these values to gain this power)

No limp mode, I think this must be hardware problem not a tune. What you guys think, what would be the problem?

boost.jpg

Thanks for ...
Read more : golf 5 1.9tdi boost problem | Views : 182 | Replies : 2


PEUGEOT 307 SID803A

HI to all I need orginal file for Peugeot 307 100kw SID803A:

SID803A 5ws40313B-T SW/HW - 9662907080/9655534080

Thanks for help.
Read more : PEUGEOT 307 SID803A | Views : 176 | Replies : 0


edc15c2 ecotune

Hi
What i have to lower to make car less smoke. Ill cant pass the MOT and need to make car less smoke.
what ill need to lover? injection part of throttle and phase of injection?
Or maybe someone can make it for me.
Read more : edc15c2 ecotune | Views : 231 | Replies : 1


How do you see this STAGE 1 +EGR OFF +DPF OFF? Volvo S40 II

EDC16C34
Volvo S40 II 1.6 109hp (PSA Motor)
diesel
2008

- Stage 1
- EGR Off
- DPF Off


I want someone with experience in ECU's to take a look at this tuning. It is a STAGE 1. Thank you. Could you also confirm that the EGR and DPF are deactivated? thank you so much
Read more : How do you see this STAGE 1 +EGR OFF +DPF OFF? Volvo S40 II | Views : 323 | Replies : 0


2JZ Reving Problem

Hello good day,
I have been struggling on my 2JZ project for a while now. It is a 2JZ Gte with TT Mod (stock turbos). It is installed in my pandem E46 drifter. I first ran it on the stock ecu and then suddenly had fuel cuts at about 4000 rpm. I then redid the entire wiring harness and converted to EMU Classic & R8 coils.

Under load, the engine still does not turn over ...
Read more : 2JZ Reving Problem | Views : 265 | Replies : 0


 

Login  •  Register


Statistics

Total posts 79424 • Total topics 26504 • Total members 33543

cron