me7.1.1 audi Rs4 B5 boot mode

Posts related to specific vehicles, or any other general tuning info.

Return to General tuning

me7.1.1 audi Rs4 B5 boot mode

Postby capske » Fri Apr 29, 2016 8:18 pm

Hi,

I'm on a project with a buddy's rs4 B5 with ecu me7.1.1
And i'm stuck.

We read the ecu in boot mode. All fine. So before tuning we wrote the original back to the car. Still everything ok. Put the ecu back, started the car and everyrhing worked fine. We modded the original file, checksums were corrected and file was 100% ok.

Wrote the file in boot mode but there it goes wrong. Every time i write to the ecu, it stops at 8% and gives an error message.

If i write the ori back the car starts and goes fine. So the ecu isn't bricked.

Can someone give me some advice. I use a galletto for read and write.

capske
Silver
 
Posts: 67
Joined: Mon Nov 18, 2013 7:34 pm
Location: belgium

Re: me7.1.1 audi Rs4 B5 boot mode

Postby sandor1987 » Fri Apr 29, 2016 10:54 pm

wich galletto did you use?
do you have mpps?

and upload file then we can check.

vlaams of frans belgie?

sandor1987
Diamond
 
Posts: 295
Joined: Sun Sep 08, 2013 5:21 pm
Location: Netherlands

Re: me7.1.1 audi Rs4 B5 boot mode

Postby capske » Sat Apr 30, 2016 7:08 pm

Hi,

Thanks for the reply.

The car was read with a Galletto v54 EU. Sadly i don't have an mpps. If i'm sure it works with mpps i would be willing to buy one.

The first file is what was read from the car (Rs4).

rs4.zip


The second one is this same file that has been modded. I had someone on an other forum verify it, and he told me it checked out ok.

WinOLS (Audi ori RS4 (mor rs4 rep DUDU ) - 360387) check ok.zip


Her is a little more info about the ECU

D0907551K
..2.7l V6/5
0261207001
1037360387
Flash:29F800BT

Thanks.

PS: Ik schrijf in het engels zodat iedereen het kan lezen… Maar ik ben van Nederlands België, eigenlijk aan de taalgrens dus 2-talig.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

capske
Silver
 
Posts: 67
Joined: Mon Nov 18, 2013 7:34 pm
Location: belgium

Re: me7.1.1 audi Rs4 B5 boot mode

Postby sandor1987 » Sun May 01, 2016 9:21 am

i upload the file in winols 2.26 and checks are not okay...

here test this ;)


** dutch **
heb je de china clone? ik heb hier ook een me7 ecu liggen en ik hou de boot er 15 secondens op en dan loopt hij in een keer door ;)
ik heb je file even gecheck in mijn winols en hij zegt dat er 9 checks niet goed waren... heb ze gecorrect zodat je hem kan proberen ;)
mpps werkt beter met me ecu.
wachtwoord stuur ik prive ;)

rs4 check ok new style.rar
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

sandor1987
Diamond
 
Posts: 295
Joined: Sun Sep 08, 2013 5:21 pm
Location: Netherlands

Re: me7.1.1 audi Rs4 B5 boot mode

Postby capske » Sun May 01, 2016 10:24 am

Hoi,

Straf bedankt voor uw snelle reactie.

De Galletto is een EU versie...

Hoe bedoel je, je houd de boot er 15 sec op.


Pin 24, 15 sec met de aarding verbinden?

We proberen nogmaals en ik laat je weten als het succesvol was.

Prettige zondag.

capske
Silver
 
Posts: 67
Joined: Mon Nov 18, 2013 7:34 pm
Location: belgium

Re: me7.1.1 audi Rs4 B5 boot mode

Postby sandor1987 » Sun May 01, 2016 1:20 pm

ja pin 24 een 15 secondens met massa.
daarna de tune file schrijven.

sandor1987
Diamond
 
Posts: 295
Joined: Sun Sep 08, 2013 5:21 pm
Location: Netherlands


Return to General tuning

Who is online

Users browsing this forum: No registered users and 1 guest