Launch control edc15

Questions and answers related to map factors, units, offsets. How to...

Launch control edc15

Postby Livero » Tue Oct 24, 2017 2:05 pm

Hi to everyoane....
Can anyone help me with some info about a launch control?
It`s a Seat leon ARL with Gtb2260vk turbo..
Now with this launch map it do 0.1-0.2 mbar.
Thx in advice
Some info about what rpm it's the best and etc.

Livero
New user
 
Posts: 9
Joined: Fri May 20, 2016 3:15 pm
Location: Romania

Re: Launch control edc15

Postby jelmer52 » Tue Oct 31, 2017 1:29 pm

Send me your file and i will help you make launch contol or pops and bangs

jelmer52
New user
 
Posts: 12
Joined: Sat Sep 26, 2015 11:49 pm
Location: holland

Re: Launch control edc15

Postby Livero » Mon Nov 06, 2017 10:32 am

Okay, i sent u an pm!
If u can really help me please do it! i spent a lot of money and time for nothing!
Thx in advice! :( ;) ;)

Livero
New user
 
Posts: 9
Joined: Fri May 20, 2016 3:15 pm
Location: Romania

Re: Launch control edc15

Postby mrpaccio » Wed Nov 29, 2017 8:46 pm

Hello to all...
I have the same problem...
I made the launch control at 3000rpm to my car, Alfa 147 Jtd 115 sw 332-536 ...
When the accelerator is pressed all the way down, the turbo pressure reaches a maximum of 0.2 bar ... Is there anyone who can help me? Thank you in advance!

mrpaccio
New user
 
Posts: 4
Joined: Tue Nov 28, 2017 3:01 pm
Location: Italia

Re: Launch control edc15

Postby UchoTD » Fri Dec 08, 2017 10:31 pm

smoke limiter? :)
bouncing rpm on launch control?

UchoTD
New user
 
Posts: 7
Joined: Tue Aug 15, 2017 2:40 pm
Location: BB_ZOO

Re: Launch control edc15

Postby mrpaccio » Wed Dec 13, 2017 8:44 pm

Hi ... thanks for answering me.
I also tried with the smoke limiter map, but it does not change ...
The turbo pressure always remains too low 0.2 bar...
Do you have other ideas?

mrpaccio
New user
 
Posts: 4
Joined: Tue Nov 28, 2017 3:01 pm
Location: Italia


Return to Map Factors, Offsets, Units and Calculations

Who is online

Users browsing this forum: No registered users and 0 guests