Hello guys! Not a long time ago i wanted a remap to make some black smoke...you know diesel - no smoke no fun. BUT...
Here i was wondering something - i have actived Launch control and when i use this file the LC has some hard strokes, like somethings wrong. But when its with the normal remap its ok and its a bit faster. I was wondering this - in the file for black smoke changed maps are :
Start of Injection(N108 SOI)- last column on 40mg/st is requested 1 degree more(ori is 16,9 max in smokefile is 17,9 degrees)
MAF correction by temperature - increased values in all columns except the ori max value(its still the high value)
Smoke limiter - little increased values(ori 51 smokefile 54 max values)
SOI limiter(temperature) - last column(80,10*) again increased with 1 degree(ori max is 16,84 in smokefile 17,84degrees)
So, can i low the dregrees to ori values in Start of injection(n108 soi) and SOI limiter(temperature) to reduce the high tempereture inside in the engine? Also with no other modifications in file, with smokefile car have more power. I dont want more power just smoke for have fun in some days. Any ideas?

Hi post your file here.