Disabling EGR EDC16U31

Posts related to switching of the EGR.

Return to EGR Off

Disabling EGR EDC16U31

Postby taktijs » Wed Aug 01, 2012 2:10 pm

My question is about the EGR table in this file: audi-a4-1-9-tdi-bke-edc16u31-t188

It is located at adress 1C3CEE in the file. The graph and the table data are in this post.

Now I have two questions regarding this EGR table:
1. why has it an RPM range that only goes upto 3500 RPM?
2. normally in VAG EGR tables I see only values upto 850mg. In this table the last column has values above this 850, what does this mean? For tuning purposes it's best to close the ERG valve, should I then change all values in the table to 850, or 1020?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

taktijs
Bronze
 
Posts: 48
Joined: Mon Jul 02, 2012 7:46 pm
Location: Netherlands

Re: Disabling EGR EDC16U31

Postby RPM freak » Wed Aug 01, 2012 7:48 pm

1. Because at higher RPM you need only clean air to make more HP. EGR must be closed.
2. 850mg/stroke are for older TDI (90 & 110 hp) with injection pump. Newer TDI PD engines 115hp -> pull more air then 850mg/stroke.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: Disabling EGR EDC16U31

Postby taktijs » Thu Aug 02, 2012 10:49 am

So it is very simple then, I just change the values lower then 850 to 850?

taktijs
Bronze
 
Posts: 48
Joined: Mon Jul 02, 2012 7:46 pm
Location: Netherlands

Re: Disabling EGR EDC16U31

Postby RPM freak » Thu Aug 02, 2012 11:48 am

For MSA15 or EDC15 Yes. For EDC16 No.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: Disabling EGR EDC16U31

Postby taktijs » Thu Aug 02, 2012 12:08 pm

So what is the way to do it then?

taktijs
Bronze
 
Posts: 48
Joined: Mon Jul 02, 2012 7:46 pm
Location: Netherlands

Re: Disabling EGR EDC16U31

Postby Relic » Fri Aug 24, 2012 11:17 am

BUMP ;)

Id like an answer to this too.
Can you explain why you cant do the same for both ?

Relic
Diamond
 
Posts: 410
Joined: Mon Aug 06, 2012 3:18 pm
Location: England

Re: Disabling EGR EDC16U31

Postby RPM freak » Sat Aug 25, 2012 1:36 am

You can try to change the lower values to the max value, but when you start the car you will have EGR DTC. Try and report.
EDC16 must be tricked to keep the EGR closed.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: Disabling EGR EDC16U31

Postby Relic » Sat Aug 25, 2012 2:40 pm

I have EDC16c31.
I have raised the MAF tables so that they all read 1500mg.
I have also dropped the control duty cycle to 15% as per the upper rpm

Target MAF reades 1200mg which appears to be a limit even when it switches to open loop mode.
Control duty reads 19-20% constant in feedback mode and 5% in openloop.
No error reported.

When it switches duty fro 20-5% and back there is no delay or lag.
Its just an instant change like a switch from 20-5 or 5-20% duty.

I will Stick it on an OBDII reader today.
See if there is a difference between HDS control duty, and OBDII requested EGR% and EGR error%.

Relic
Diamond
 
Posts: 410
Joined: Mon Aug 06, 2012 3:18 pm
Location: England

Re: Disabling EGR EDC16U31

Postby reinzg » Tue Aug 28, 2012 6:49 pm

on EDC16 in general and 'better to intervene on the control bits of egr rather than on maps duty cycle

reinzg
New user
 
Posts: 21
Joined: Tue Aug 28, 2012 6:21 pm
Location: italy

Re: Disabling EGR EDC16U31

Postby taktijs » Tue Aug 28, 2012 7:12 pm

reinzg wrote:on EDC16 in general and 'better to intervene on the control bits of egr rather than on maps duty cycle


And where can I find the controlbits for this ECU?

taktijs
Bronze
 
Posts: 48
Joined: Mon Jul 02, 2012 7:46 pm
Location: Netherlands

Next

Return to EGR Off

Who is online

Users browsing this forum: No registered users and 0 guests