BMW E46 330CD 204BHP HW 0281011121 SW 361876

by **aj145** » Thu May 08, 2014 10:36 pm

Original File: http://www.ecuedit.com/bmw-330cd-204bhp-hw-0281011121-sw-361876-edc16c31-t5871

I am making a new WinOLS file of my original dump and the maps I have identified. I have made this from most of the information I found in this forum, however not many of the addresses related to SW version 361876 which seems quite rare, so I have updated the addresses to match. I still need to find / label the SOI maps and some of the unknown maps before I can start tuning my car. If anyone can help with identifying anything I would be grateful:

Am I OK to write this back with MPPS clone if I use a power supply to get a stable >+14v?

Code: Select all: E0206 Drivers Wish 1 9x14 E037E Drivers Wish 2 9x14 E09B8 Torque Limiter IQ 25x1 E0ADA ?? 16x16 E0E2C EGR 1 16x12 E107A EGR 2 /Expected Air 16x16 E1886 ?? 16x16 E1F34 EGR Hyst 1 16x1 E1F90 EGR Hyst 2 16x1 E734E ?? 10x8 E7446 ?? 10x10 E7888 ?? 8x8 E7B3E ?? 8x8 E7CA6 Torque Limiter Main 21x1 E7E4A Drag Torque 16x16 E8094 TPS Limit 9x9 E8262 Torque Limiter 1 21x1 E82B8 Torque Limiter 2 21x1 E830E Torque Limiter 3 21x1 E834E DW Limit by CT 10x1 E838E Torque Limiter 4 21x1 E845C IQ Limit by TPS 8x8 E8AE4 ?? 16x16 E91B0 Lambda 1 16x16 E93F4 Lambda 2 16x16 E9890 Lambda 3 16x16 E9AD4 Lambda 4 16x16 EA154 ?? 16x16 EA5EE NM to IQ 1 16x16 EAAD2 NM to IQ 2 16x16 EAD16 NM to IQ 3 16x16 EB1AC Torque Limiter 10x1 EB1D6 Torque Limiter 10x1 EB200 Torque Limiter 10x1 EB22A Torque Limiter 10x1 EB254 Torque Limiter 10x1 EB27E Torque Limiter 10x1 EB2A8 Torque Limiter 10x1 EB2D2 Torque Limiter 10x1 EB2FC Torque Limiter 10x1 ECD2C SOI ? 16x16 ECF70 ?? 16x16 ED1B4 ?? 16x16 EDBB8 Swirl Flaps 16x16 EE040 ?? 16x16 EE284 ?? 16x16 EEC5E ?? 16x16 F1048 ?? 16x16 F2276 ?? 16x16 F48D4 ?? 16x11 F6168 ?? 16x8 F6400 ?? 16x32 F6CDC Idle Speed 8x8 F7AAC N75 – 1 16x16 F7E7C N75 – 2 16x16 F868C N75 – 3 16x16 F88D2 N75 – 4 16x16 F8D52 Boost Pressure 16x16 F8F96 Boost Pressure 16x16 F91DA Boost Pressure 16x16 F9406 Boost Limiter 10x10 F961E SVBL 1x1 F99AA ?? 4x10 F9CAE ?? 16x16 FA30C ?? 8x2 FA888 ?? 8x8 FB3E6 ?? 16x14 FB758 ?? 6x6 FC01E ?? 16x16 FC35A ?? 12x8 FC488 Rail Pressure 16x16 FC6C2 ?? 8x12 FC7A6 ?? 8x8 FCA0A Rail Pressure 2 16x16

by **aj145** » Sun May 11, 2014 11:40 am

Can anyone help confirm SOI or duration maps?

by **biela** » Tue Jun 03, 2014 10:51 pm

ECD2C, ECF70, ED1B4 and EEC5E are SOI.
ED644 could be SOI limiter.

And F53D2 is duration or injection opening time.

F9CAE and F80C0 for N75

by **BMW330cd** » Fri Apr 24, 2015 1:05 am

Have been working on this quite a lot lately

here's my updated list

Code: Select all: Injector spray angle 160degree in 204bhp 335d injectors 70cc larger - approx 20% Map Sensor 3 Bar absolute Rail Pressure Sensor 1800Bar in 204bhp Engine Bore/Stroke = 84x90 Compression = 17:1 E0206 Drivers Wish 1 9x14 E037E Drivers Wish 2 9x14 E09B8 Torque Limiter IQ 25x1 E0ADA ?? 16x16 E0E2C EGR 1 16x12 E107A EGR 2 /Expected Air 16x16 E1886 ?? 16x16 E1F34 EGR Hyst 1 16x1 E1F90 EGR Hyst 2 16x1 E734E ?? 10x8 - Modified E7446 ?? 10x10 E7888 ?? 8x8 E7B3E ?? 8x8 E7CA6 Torque Limiter Main 21x1 E7E4A Drag Torque 16x16 E8094 Atmospheric Pressure Torque Limiter 9x9 E815E Overheating Protection 9x9 E8262 Torque Limiter 1 21x1 E82B8 Torque Limiter 2 21x1 E830E Torque Limiter 3 21x1 E834E DW Limit by CT 10x1 E838E Torque Limiter 4 21x1 E845C IQ Limit by TPS 8x8 E8AE4 ?? 16x16 E91B0 Lambda 1 16x16 E93F4 Lambda 2 16x16 E9890 Lambda 3 16x16 E9AD4 Lambda 4 16x16 EA154 ?? 16x16 EA5EE NM to IQ 1 16x16 EAAD2 NM to IQ 2 16x16 EAD16 NM to IQ 3 16x16 EB1AC Torque Limiter1 10x1 EB1D6 Torque Limiter2 10x1 EB200 Torque Limiter3 10x1 EB22A Torque Limiter4 10x1 EB254 Torque Limiter5 10x1 EB27E Torque Limiter6 10x1 EB2A8 Torque Limiter7 10x1 EB2D2 Torque Limiter8 10x1 EB2FC Torque Limiter9 10x1 ECD2C SOI 16x16 ECF70 SOI 16x16 ED1B4 SOI 16x16 EDBB8 Swirl Flaps 16x16 EE040 ?? 16x16 EE284 ?? 16x16 EEC5E SOI 16x16 EEEc4 SOI Limiter?16x16 EF4E2 ?? 10x10 F1048 ?? 16x16 F13B0 ?? 16x8 F1BAA ?? 16x16 F2032 ?? 16x16 F2276 ?? 16x16 F48D4 ?? 16x11 F249A ?? 8x8 F26FE ?? 16x16 F2B62 ?? 16x16 F2FEA ?? 16x16 F3242 ?? 16x16 F4CB4 ?? 16x16 F514E ?? 16x16 F53D2 duration or injection opening time 40x16 F5D9A Rail Pressure V Temperature? 8x16 F6168 ?? 16x8 F629C ?? 16x8 F6400 ?? 16x32 F6834 ?? 8x16 F6CDC Idle Speed 8x8 F793C ?? 12x10 F7AAC N75 – 1 16x16 F7E7C N75 – 2 16x16 F80c0 N75 - 3 16x16 F868C N75 – 4 16x16 F88D2 N75 – 5 16x16 F8D52 Boost Pressure 16x16 F8F96 Boost Pressure 16x16 F91DA Boost Pressure 16x16 F9406 Boost Limiter 10x10 F961E SVBL 1x1 F99AA ?? 4x10 F9CAE N75 16x16 FA30C ?? 8x2 FA888 ?? 8x8 FB3E6 ?? 16x14 FB758 ?? 6x6 FBBEE Rail Pressure 12x8 FC01E ?? 16x16 FC35A Rail Pressure 12x8 FC488 Rail Pressure 16x16 x FC6C2 ?? 8x12 x FC7A6 ?? 8x8 FCA0A Rail Pressure 2 16x16 FCE8C Rail Pressure 8x8 FCF48 Rail Pressure Temperature Limiter 5x6 FCF9E Rail Pressure 5x6 FD794 Rail Pressure Sensor Calibration? 1x1 FD796 Single Value Rail Pressure Limiter - BAR 1x1 FFB70 ?? 4x1 (seen modified) FFBF8 ?? 4x1 (seen modified)

by **adriancl** » Fri Apr 24, 2015 8:59 am

Hi mate,
You have a big maps list but some of them are not maps, that because winols can't find right 100% maps.Some of your maps are only parts of right map axis,some of them are not maps.For example your map FA30C 8x2, is not a map ,first 8 values are axis values for "Untere welle motorschutz"map.
Also some maps of your list not need to tune , for example E0ADA 16x16=Ersatzwert fuer Luftmassenstrom", and also one example your map FC01E, 16x16,"Druckregelung über Zumesseiheit"(is on Rail maps area)
My advice-take a good damos file and study carefully , Of course it takes time and patience ,but it is the only way to learn something about this EDC16C31 ECU-I think one of the most well done sw for BMW Diesel cars.
Use key words with search function(Ctrl+F) to find your maps, is the best way,but need some german knowledge.

by **BMW330cd** » Fri Apr 24, 2015 8:31 pm

adriancl wrote:Hi mate,
You have a big maps list but some of them are not maps, that because winols can't find right 100% maps.Some of your maps are only parts of right map axis,some of them are not maps.For example your map FA30C 8x2, is not a map ,first 8 values are axis values for "Untere welle motorschutz"map.
Also some maps of your list not need to tune , for example E0ADA 16x16=Ersatzwert fuer Luftmassenstrom", and also one example your map FC01E, 16x16,"Druckregelung über Zumesseiheit"(is on Rail maps area)
My advice-take a good damos file and study carefully , Of course it takes time and patience ,but it is the only way to learn something about this EDC16C31 ECU-I think one of the most well done sw for BMW Diesel cars.
Use key words with search function(Ctrl+F) to find your maps, is the best way,but need some german knowledge.

I have two examples of good remaps on edc16 but no good damos for this. Do you have one you can give me?
Have been studying these for a long time now.

I started with MSA11 ECU's on BMW,those are fairly straightforward & can map those quite good.

The version of winols I have never finds checksums for my ORI file on EDC16, only finds 2 patches.

by **adriancl** » Sat Apr 25, 2015 11:54 am

BMW330cd wrote:
adriancl wrote:Hi mate,
You have a big maps list but some of them are not maps, that because winols can't find right 100% maps.Some of your maps are only parts of right map axis,some of them are not maps.For example your map FA30C 8x2, is not a map ,first 8 values are axis values for "Untere welle motorschutz"map.
Also some maps of your list not need to tune , for example E0ADA 16x16=Ersatzwert fuer Luftmassenstrom", and also one example your map FC01E, 16x16,"Druckregelung über Zumesseiheit"(is on Rail maps area)
My advice-take a good damos file and study carefully , Of course it takes time and patience ,but it is the only way to learn something about this EDC16C31 ECU-I think one of the most well done sw for BMW Diesel cars.
Use key words with search function(Ctrl+F) to find your maps, is the best way,but need some german knowledge.

I have two examples of good remaps on edc16 but no good damos for this. Do you have one you can give me?
Have been studying these for a long time now.

I started with MSA11 ECU's on BMW,those are fairly straightforward & can map those quite good.

The version of winols I have never finds checksums for my ORI file on EDC16, only finds 2 patches.

Don't have a domos file for your sw Nr., have for another sw. , but structure is same for EDC16C31,only some small diff. on maps address.Easy task to find your maps.BTW, checksum can be made with Checsum Corerctor, also writing tool do that.Cracked Winols 2.24 don't do that.

by **tato1989** » Mon Nov 28, 2016 12:37 am

Hello guys,
I have same car: BMW E46 330Cd Euro4, 6 speed manual and some parameters are same as in listing but there are many others, different from it.
Any idea where can i get it?

by **Vito_** » Thu Dec 29, 2016 3:23 pm

tato1989 wrote:Hello guys,
I have same car: BMW E46 330Cd Euro4, 6 speed manual and some parameters are same as in listing but there are many others, different from it.
Any idea where can i get it?

E46 3.0d 204hp use diffrent injectors and ecu for EU3 cars and and EU4 cars. Probably list here is for EU3 car and U have Euro4.

EU3 use "131" injectors, but EU4 use "216" injectors which are more efficient (capable about 320hp)